{"title":"Actisense NMEA 2000","description":"\u003ch2\u003eActisense NMEA 2000\u003c\/h2\u003e\u003cp\u003eActisense is the authority on NMEA data, building the interfaces and networks that tie a helm together. This is the Actisense nmea 2000 range: plug-and-play backbone, drops and devices for a NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/actisense\"\u003eActisense range\u003c\/a\u003e or \u003ca href=\"\/collections\/nmea-2000\"\u003eNMEA 2000 from every brand\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"a2k-kit-2a","title":"Actisense Micro starter kit - contains MPT-2, TER-M x2, T-MFF(x2) TDC-6M","description":"\u003cp\u003eThe NMEA 2000 Micro Starter Kit 2a from Actisense provides everything needed to build a small NMEA 2000 network from scratch. It combines an A2K-MPT-2 Micro Power T to feed the backbone, two Micro tee-pieces to create device drops, two Micro terminators to correctly terminate each end of the backbone, and a longer 6 metre Micro drop cable for connecting a device further from the backbone. Using genuine Actisense components throughout, it is an easy, reliable way to get a network up and running, and it can be expanded later by adding further tees, drops and devices.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015346516,"sku":"A2K-KIT-2a","price":146.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-89c6459a_4b2c11b6-1e19-4470-aff7-34c5c65e92e5.png?v=1781903795"},{"product_id":"a2k-tdc-0m25","title":"Actisense Micro cable assembly 0.25 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-0M25 is a 0.25 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a short drop cable to connect an instrument to the backbone, or to extend the backbone itself where only a small increase in length is needed.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015674196,"sku":"A2K-TDC-0M25","price":25.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_4c923d6d-354a-4536-b58f-2b78faf678b6.png?v=1781903798"},{"product_id":"a2k-pmw-f","title":"Actisense Rear panel mount wired, 5 pin micro female","description":"\u003cp\u003eThe Actisense A2K-PMW-F lets an NMEA 2000 connection pass through a watertight bulkhead or panel without compromising either the network or the barrier it crosses. It is a rear-mounted, pre-wired 5-pin Micro female connector, and its waterproof seals keep the panel and the NMEA 2000 connection watertight. The female version is a neat way to add a pluggable port to a QNB-1 network block, as it can replace any of the existing drop glands.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a nickel-plated brass housing, mounts through a 15.3 mm hole using a PG9 thread and nut, and is pre-fitted with stripped and tinned 18 AWG wires. It is rated to IP67 when mated, meets IEC 61076-2-101, and is NMEA 2000 approved, RoHS compliant and UL certified. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951018525012,"sku":"A2K-PMW-F","price":14.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3fb8625a.png?v=1781903802"},{"product_id":"a2k-gcm-0m25","title":"Actisense Micro gender changer (male to male) 0.25 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-GCM-0M25 is a 0.25 metre NMEA 2000 Micro gender changer with a male connector at both ends. It solves a common installation problem: joining two cables or devices that both present the same gender of connector on an NMEA 2000 backbone, where a straight connection is impossible. This male to male version mates two female connectors together.\u003c\/p\u003e\u003cp\u003eIt is made with Actisense designed connectors and 0.25 metre UL certified cable, giving an easy and secure connection that matches the quality of the rest of the range. The moulded M12 connectors give an IP67 rated seal once mated. For longer joining or drop cables, Actisense trunk and drop cable assemblies are available in a range of lengths.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951018852692,"sku":"A2K-GCM-0M25","price":27.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-f2d6e4fe.png?v=1781903803"},{"product_id":"a2k-ffc-sm","title":"Actisense Micro field fit connector, straight - male","description":"\u003cp\u003eThe Actisense A2K-FFC-SM is a field-fit connector in the straight, male configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. Because the connector is assembled on site, cables can be cut to any length, which removes excess cable and lets the network be fully customised to the vessel. As the two halves are screwed together an internal gland tightens around the cable to maintain watertight integrity.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020097876,"sku":"A2K-FFC-SM","price":23.84,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c_b28f2bf3-c9ff-4fd3-9486-0946952cc31d.png?v=1781903802"},{"product_id":"a2k-ter-u","title":"Actisense NMEA 2000 Smart Universal Micro Terminator","description":"\u003cp\u003eThe Actisense A2K-TER-U is the world's first intelligent universal in-line terminator for NMEA 2000 networks. Because it ships with blanking caps it can be used as a male terminator, a female terminator or a feed-through in-line terminator, which makes it genuinely universal and ideal for awkward positions such as the top of a mast where the required gender may not be known in advance. It can be fitted at the very end of the backbone or in-line in a location that is difficult to reach.\u003c\/p\u003e\u003cp\u003eWhat sets the TER-U apart is its built-in diagnostic function. A high-accuracy voltage monitoring circuit continuously watches the bus voltage and drives internal LEDs: a green indication confirms the voltage is within the required range and of the correct polarity, while a red indication warns that the voltage has fallen below the minimum required level. If the LEDs do not light at all, there is no power or the polarity is reversed. Because the terminators illuminate, they also confirm at a glance that a terminator is actually present at each end of the network. It houses a 120 ohm resistor, uses gold-plated contacts in glass-filled carriers, carries a UL94 V0 flammability rating and is rated to IP67 when mated. Like the rest of the Actisense range it is NMEA 2000 certified and covered by the standard 5 year guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020556628,"sku":"A2K-TER-U","price":32.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-b0cfed78.jpg?v=1781903798"},{"product_id":"a2k-ffc-rm","title":"Actisense Micro field fit connector, right-angle male","description":"\u003cp\u003eThe Actisense A2K-FFC-RM is a field-fit connector in the right-angle, male configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. The right-angle body lets the cable leave the connector at 90 degrees, which is useful for tidy routing and for fitting behind panels or around tight bends. Because the connector is assembled on site, cable can be cut to any length and the network fully customised, and an internal gland tightens around the cable as the connector is screwed together to keep the joint watertight.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020786004,"sku":"A2K-FFC-RM","price":24.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c_9c24b7b3-e6ee-4280-99ee-708c983913ca.png?v=1781903802"},{"product_id":"a2k-sbn-2","title":"Actisense Self-Contained Boat Network - complete network for eight devices with internal terminators and power feed.","description":"\u003cp\u003eThe Self-Contained Boat Network (SBN-2) makes installing a small NMEA 2000 network quicker and easier than ever. It packs the equivalent of eight tee-pieces into a single over-moulded case with the termination resistors already built in, so there are no separate tees to chain together and no terminators to add. Once the attached three-metre power cable is connected to the boat supply, a correctly terminated network for up to eight devices is ready to use, taking plug and play to the next level.\u003c\/p\u003e\u003cp\u003eBy providing a complete, correctly terminated network in one compact unit, the SBN-2 takes up far less space than a backbone built from individual tees and drops, and reduces the amount of cabling, connectors, cost and weight. Its ruggedised, flame-retardant housing, metal coupling nuts and integrated EMI shield suit wet and harsh marine conditions, while the orange UL-rated power cable is colour coded to stand out from the drop cables. Note that the SBN-2 cannot be extended beyond eight device drops.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020884308,"sku":"A2K-SBN-2","price":102.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-84c4ed64.jpg?v=1781903797"},{"product_id":"a2k-tdc-6m","title":"Actisense Micro cable assembly 6 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-6M is a 6 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. At 6 metres it is the longest permitted single drop cable, ideal for reaching an instrument sited well away from the backbone, and it can equally be used to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020949844,"sku":"A2K-TDC-6M","price":43.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_c969ec85-6069-4a78-8058-8e6fc9165e4c.png?v=1781903799"},{"product_id":"a2k-gcf-0m25","title":"Actisense Micro gender changer (female to female) 0.25 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-GCF-0M25 is a 0.25 metre NMEA 2000 Micro gender changer with a female connector at both ends. It solves a common installation problem: joining two cables or devices that both present the same gender of connector on an NMEA 2000 backbone, where a straight connection is impossible. This female to female version mates two male connectors together.\u003c\/p\u003e\u003cp\u003eIt is made with Actisense designed connectors and 0.25 metre UL certified cable, giving an easy and secure connection that matches the quality of the rest of the range. The moulded M12 connectors give an IP67 rated seal once mated. For longer joining or drop cables, Actisense trunk and drop cable assemblies are available in a range of lengths.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951021146452,"sku":"A2K-GCF-0M25","price":27.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-07ec20c7.png?v=1781903801"},{"product_id":"a2k-screwcap-10-f","title":"Actisense Protective SCREW cover for NMEA 2000 female Micro connectors (Bag of 10 pieces)","description":"\u003cp\u003eThe Actisense A2K-SCREWCAP-10-F is a pack of ten protective screw covers designed for female NMEA 2000 Micro connectors. Any unused female port on an NMEA 2000 network, such as a spare connection on a T-piece, drop or terminator, should be capped to keep out dust and moisture and to protect the contacts and threads; these caps screw onto the connector to do exactly that.\u003c\/p\u003e\u003cp\u003eThe covers match the female Micro connectors used across the Actisense NMEA 2000 range and are supplied in a bag of ten for convenient stocking during an installation. They are backed by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951022555476,"sku":"A2K-SCREWCAP-10-F","price":15.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-eb303476.png?v=1781903801"},{"product_id":"a2k-ffc-rf","title":"Actisense Micro field fit connector, right-angle female","description":"\u003cp\u003eThe Actisense A2K-FFC-RF is a field-fit connector in the right-angle, female configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. The right-angle body lets the cable leave the connector at 90 degrees, which is useful for tidy routing and for fitting behind panels or around tight bends. Because the connector is assembled on site, cable can be cut to any length and the network fully customised, and an internal gland tightens around the cable as the connector is screwed together to keep the joint watertight.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951060730196,"sku":"A2K-FFC-RF","price":24.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c_55d3731d-904d-447f-bcf4-2d1908ce975c.png?v=1781903801"},{"product_id":"a2k-screwcap-10-m","title":"Actisense Protective SCREW cover for NMEA 2000 male Micro connectors (Bag of 10 pieces)","description":"\u003cp\u003eThe Actisense A2K-SCREWCAP-10-M is a pack of ten protective screw covers designed for male NMEA 2000 Micro connectors. Any unused male port on an NMEA 2000 network, such as a spare connection on a T-piece, drop or terminator, should be capped to keep out dust and moisture and to protect the contacts and threads; these caps screw onto the connector to do exactly that.\u003c\/p\u003e\u003cp\u003eThe covers match the male Micro connectors used across the Actisense NMEA 2000 range and are supplied in a bag of ten for convenient stocking during an installation. They are backed by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951062630740,"sku":"A2K-SCREWCAP-10-M","price":15.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-a1a57320.gif?v=1781903801"},{"product_id":"a2k-tdc-5m","title":"Actisense Micro cable assembly 5 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-5M is a 5 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951064564052,"sku":"A2K-TDC-5M","price":41.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a.png?v=1781903798"},{"product_id":"a2k-kit-1a","title":"Actisense Micro starter kit - contains MPT-2, TER-M x2, T-MFF(x2) TDC-2M","description":"\u003cp\u003eThe NMEA 2000 Micro Starter Kit 1a from Actisense provides everything needed to build a small NMEA 2000 network from scratch. It combines an A2K-MPT-2 Micro Power T to feed the backbone, two Micro tee-pieces to create device drops, two Micro terminators to correctly terminate each end of the backbone, and a 2 metre Micro drop cable to connect your first device. Using genuine Actisense components throughout, it is an easy, reliable way to get a network up and running, and it can be expanded later by adding further tees, drops and devices.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951065809236,"sku":"A2K-KIT-1a","price":138.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-89c6459a_37beac27-2a9b-4849-9d0c-be8e9d01c9a7.png?v=1781903794"},{"product_id":"a2k-kit-4a","title":"Actisense Micro Starter Kit - contains MPT-2, TER-U(x2), T-MFF(x2), TDC-4M","description":"\u003cp\u003eThe NMEA 2000 Micro Smart Starter Kit 4a from Actisense provides everything needed to build a small NMEA 2000 network from scratch. It combines an A2K-MPT-2 Micro Power T to feed the backbone, two Micro tee-pieces to create device drops, a 4 metre Micro drop cable, and, in place of standard terminators, two A2K-TER-U Smart Universal Micro Terminators. These intelligent terminators can be fitted at either end of the backbone and provide added network diagnostics, making this the smart choice for a reliable, easy-to-monitor network. Built from genuine Actisense components, the kit is fully expandable as your system grows.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951066005844,"sku":"A2K-KIT-4a","price":183.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-89c6459a.png?v=1781903794"},{"product_id":"a2k-4wd-1","title":"Actisense Micro 4-Way Drop","description":"\u003cp\u003eThe Actisense Micro 4-Way Drop is a single connection point that splits out to four device drops on an NMEA 2000 network, making it far easier to reach several instruments that are grouped together. Where four devices would normally each need their own T-piece and drop cable, or the backbone would have to be routed closer to them, the 4-Way Drop brings a single 2 m lead to the cluster and provides four female connection points from it.\u003c\/p\u003e\u003cp\u003eThe assembly terminates in one male connector for the backbone side and four female connectors for the device drops, and uses the same UL-certified Micro cable and gold-plated contacts as the rest of the Actisense connector range. As with any NMEA 2000 network, the total drop length to any device must not exceed 6 m. It is backed by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951066038612,"sku":"A2K-4WD-1","price":82.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-446c6fa7.png?v=1781903797"},{"product_id":"a2k-pmw-m","title":"Actisense Rear panel mount wired, 5 pin micro male","description":"\u003cp\u003eThe Actisense A2K-PMW-M lets an NMEA 2000 connection pass through a watertight bulkhead or panel without compromising either the network or the barrier it crosses. It is a rear-mounted, pre-wired 5-pin Micro male connector, and its waterproof seals keep the panel and the NMEA 2000 connection watertight, providing a tidy and permanent way to bring the network through a console, locker or bulkhead.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a nickel-plated brass housing, mounts through a 15.3 mm hole using a PG9 thread and nut, and is pre-fitted with stripped and tinned 18 AWG wires. It is rated to IP67 when mated, meets IEC 61076-2-101, and is NMEA 2000 approved, RoHS compliant and UL certified. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951068234068,"sku":"A2K-PMW-M","price":14.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3fb8625a_96021fbb-84ed-497d-8fbf-a200586a37f6.png?v=1781903803"},{"product_id":"a2k-tdc-3m","title":"Actisense Micro cable assembly 3 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-3M is a 3 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951070855508,"sku":"A2K-TDC-3M","price":35.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_0fc3931b-fdcb-4a9c-9561-3ebd28484763.png?v=1781903798"},{"product_id":"a2k-ter-m","title":"Actisense Micro terminator male","description":"\u003cp\u003eThe Actisense A2K-TER-M is a male Micro termination resistor for NMEA 2000 networks. Every NMEA 2000 backbone must have exactly two termination resistors fitted, one at each end, to give the bus its correct electrical characteristics and to preserve signal integrity. This is the male version, for use where the end of the backbone presents a female connector.\u003c\/p\u003e\u003cp\u003eThe terminator houses a 120 ohm resistor and uses gold-plated brass male contacts in a glass-filled carrier and rugged PVC housing, so it is exceptionally robust in harsh marine conditions while remaining quick and secure to fit. It is UL certified to UL1277, rated to IP67 when mated, and is fully NMEA 2000 certified and covered by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071019348,"sku":"A2K-TER-M","price":13.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-62309bc4.png?v=1781903797"},{"product_id":"a2k-bulk-100m","title":"Actisense Micro bulk cable reel, 100 metres, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-BULK-100M is a 100 metre reel of genuine Actisense NMEA 2000 Lite bulk cable, used to create or extend a network backbone to whatever length an installation needs. It is supplied as bare cable with no connectors, so it is ideal for use with the Actisense QNB-1 Quick Network Block or with Field Fit Connectors, letting you cut and terminate each run to the exact length required.\u003c\/p\u003e\u003cp\u003eThe cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. Lite cable can build a backbone up to 100 metres long; where a longer run is required the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections within the 100 metre maximum.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071084884,"sku":"A2K-BULK-100M","price":352.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/005-a2kbulk100m_1_new.jpg?v=1783022293"},{"product_id":"a2k-tdc-10m","title":"Actisense Micro cable assembly 10 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-10M is a 10 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. At 10 metres it is used to extend the backbone, providing a long, ready-terminated run between devices without the need for field-fit connectors.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071969620,"sku":"A2K-TDC-10M","price":59.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_64c54223-0f7f-4a08-a9c5-bd2fba880298.png?v=1781903799"},{"product_id":"a2k-tdc-2m","title":"Actisense Micro cable assembly 2 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-2M is a 2 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951073935700,"sku":"A2K-TDC-2M","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_9111a42a-4070-4951-abf4-cc9fa3a19ac3.png?v=1781903799"},{"product_id":"a2k-ffc-sf","title":"Actisense Micro field fit connector, straight - female","description":"\u003cp\u003eThe Actisense A2K-FFC-SF is a field-fit connector in the straight, female configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. Because the connector is assembled on site, cables can be cut to any length, which removes excess cable and lets the network be fully customised to the vessel. As the two halves are screwed together an internal gland tightens around the cable to maintain watertight integrity.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951074492756,"sku":"A2K-FFC-SF","price":23.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c.png?v=1781903798"},{"product_id":"db9-f","title":"Actisense 9 pin, D type moulded cable assembly (female)","description":"\u003cp\u003eThe Actisense DB9-F is a 9-pin D-type moulded cable assembly with a female connector, supplied ready-made with the DB9 fitted at one end and bare wires at the other. The female 9-pin D-Sub follows the standard RS232 pin-out, making it a convenient way to wire an Actisense NMEA device or serial connection to equipment fitted with a standard 9-pin serial port.\u003c\/p\u003e\u003cp\u003eThe moulded connector provides a durable, strain-relieved termination, saving the time and uncertainty of assembling a D-type connector by hand.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951122334036,"sku":"DB9-F","price":9.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3523294f.png?v=1781903807"},{"product_id":"qnb-1-pmw","title":"Actisense NMEA 2000 Network Block, 6 micro female drops, power feed and diagnostic features","description":"\u003cp\u003eThe Quick Network Block QNB-1-PMW gives NMEA 2000 backbones fault-free, fused connections in a single sealed enclosure, replacing a string of individual tee-pieces with one IP66 block offering six drops. It is perfectly suited to areas of high instrument density where several sensors and displays sit close together. This version is fitted with six standard NMEA 2000 M12 (micro-fit) female connectors for true plug-and-play installation, with minimal wiring required, while the backbone glands at the top still allow any cable, including Raymarine SeaTalk NG, to be stripped and wired in to create hybrid networks without adaptor cables.\u003c\/p\u003e\u003cp\u003eThe QNB-1-PMW powers the left and right sides of the backbone independently, each protected by its own clearly visible ATO fuse. Feeding each half separately reduces voltage drop and means a blown fuse on one side leaves the other half running, adding useful redundancy. LED indicators report power, reversed polarity, fuse status and the presence of data on the bus, so an installer can diagnose a network at a glance. No software or setup is required.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951196684628,"sku":"QNB-1-PMW","price":317.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/005-qnb-1-pmw_1_new.jpg?v=1783022315"},{"product_id":"a2k-tdc-0m5","title":"Actisense Micro cable assembly 0.5 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-0M5 is a 0.5 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself where a short increase in length is needed.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951263727956,"sku":"A2K-TDC-0M5","price":28.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_c48aff84-21c3-4e32-9ba8-ac0c5193a95b.png?v=1781903798"},{"product_id":"a2k-tdc-1m","title":"Actisense Micro cable assembly 1 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-1M is a 1 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55952849797460,"sku":"A2K-TDC-1M","price":29.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_381b8839-072a-4e2d-b470-1b44fc3babee.png?v=1781903799"},{"product_id":"a2k-tdc-4m","title":"Actisense Micro cable assembly 4 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-4M is a 4 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953005642068,"sku":"A2K-TDC-4M","price":38.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_62b2789a-a7f9-4729-93bb-488e75230ff2.png?v=1781903799"},{"product_id":"a2k-t-mff","title":"Actisense Micro T piece","description":"\u003cp\u003eThe Actisense Micro T-Piece is used wherever a single drop or port is needed from an NMEA 2000 backbone to connect an additional device. Its quality-engineered connectors are shaped for easy, secure mating, and the tee accepts Actisense Micro cable assemblies even when field-fit connectors have been used to make them up, which makes it unusually flexible when a network is built or altered on board.\u003c\/p\u003e\u003cp\u003eThe T-piece presents two female connectors and one male connector, each with gold-plated contacts and a glass-filled contact carrier, housed in a rugged PVC body. It is UL certified to UL1277, rated to IP67 when mated and, like the rest of the Actisense connector range, is fully NMEA 2000 certified and covered by the standard 5 year guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953449746772,"sku":"A2K-T-MFF","price":25.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-d62d041c.png?v=1781903796"},{"product_id":"a2k-ter-f","title":"Actisense Micro terminator female","description":"\u003cp\u003eThe Actisense A2K-TER-F is a female Micro termination resistor for NMEA 2000 networks. Every NMEA 2000 backbone must have exactly two termination resistors fitted, one at each end, to give the bus its correct electrical characteristics and to preserve signal integrity. This is the female version, for use where the end of the backbone presents a male connector.\u003c\/p\u003e\u003cp\u003eThe terminator houses a 120 ohm resistor and uses gold-plated phosphor bronze female contacts in a glass-filled carrier and rugged PVC housing, so it is exceptionally robust in harsh marine conditions while remaining quick and secure to fit. It is UL certified to UL1277, rated to IP67 when mated, and is fully NMEA 2000 certified and covered by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953456169300,"sku":"A2K-TER-F","price":13.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-96ad8a10.png?v=1781903794"},{"product_id":"a2k-4wt","title":"Actisense Micro 4-way T piece","description":"\u003cp\u003eThe Actisense Micro 4-Way T-Piece is used wherever several drops or ports are needed from an NMEA 2000 backbone in the same location. Rather than fitting four separate T-pieces along the trunk, this single block provides four device connection points in one compact housing, saving both time and space during installation while costing less than four individual tees.\u003c\/p\u003e\u003cp\u003eIt carries five female connectors and one male connector, all built with gold-plated contacts and a glass-filled contact carrier, and connects directly to Actisense UL-certified Micro cable assemblies. The flame-retardant, halogen-free TPU housing includes a copper foil shield, and the mated connection is rated to IP67. Like the rest of the Actisense connector range it is fully NMEA 2000 certified and backed by the standard 5 year guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55971554230612,"sku":"A2K-4WT","price":87.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-f0d49c24.png?v=1781903796"}],"url":"https:\/\/hudsonmarine.co.uk\/collections\/actisense-nmea-2000.oembed?page=2","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}