{"title":"Garmin Autopilot Drive Units","description":"\u003ch2\u003eGarmin Autopilot Drive Units\u003c\/h2\u003e\u003cp\u003eGarmin pairs decades of GPS heritage with some of the most capable sonar and chartplotting on the water. This is the Garmin autopilot drive units range: the drives that turn the rudder under autopilot control.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/garmin\"\u003eGarmin range\u003c\/a\u003e or \u003ca href=\"\/collections\/drive-units\"\u003eAutopilot Drive Units from every brand\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"garmin-1-2-litre-autopilot-pump-kit-2018-010-00705-64","title":"Garmin 1.2 Litre Autopilot Pump Kit 2018","description":"\u003cp\u003eThe Garmin 1.2 Litre Autopilot Pump Kit is a reversing electro-hydraulic pump that steers a hydraulically steered boat under the command of a Garmin GHP or Reactor autopilot. Its nominal flow rate suits small to mid-size steering cylinders, providing smooth and responsive autopilot steering.\u003c\/p\u003e\u003cp\u003eThe pump connects to the autopilot electronic control unit and must be installed on a vented hydraulic steering system in a dry, protected location. Installation should be carried out by a qualified marine engineer following the supplied instructions, and the system must be fully bled of air before use.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951072166228,"sku":"010-00705-64","price":764.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-a3be6e40.jpg?v=1781903011"},{"product_id":"garmin-2-litre-autopilot-pump-kit-2018-010-00705-63","title":"Garmin 2 Litre Autopilot Pump Kit 2018","description":"\u003cp\u003eThe Garmin 2 Litre Autopilot Pump Kit is a reversing electro-hydraulic pump that steers a hydraulically steered boat under the command of a Garmin GHP or Reactor autopilot. With a higher nominal flow rate, it suits larger steering cylinders and bigger vessels that need more hydraulic volume to move the rudder at sea.\u003c\/p\u003e\u003cp\u003eThe pump connects to the autopilot electronic control unit and must be installed on a vented hydraulic steering system in a dry, protected location. Installation should be carried out by a qualified marine engineer following the supplied instructions, and the system must be fully bled of air before use.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951115583828,"sku":"010-00705-63","price":764.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-eaeea343.jpg?v=1781903013"},{"product_id":"garmin-ghp-compact-reactor-40-hydraulic-autopilot-system-with-1l-pump-and-no-controller-010-00705-06","title":"Garmin GHP Compact Reactor 40 Hydraulic Autopilot System with 1L Pump and No Controller","description":"The Garmin Compact Reactor 40 Hydraulic autopilot corepack provides precise, GPS-stabilised steering for boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn, holding a set course or following a route accurately. This package includes a compact 1 L electro-hydraulic pump that drives the steering cylinder, an electronic control unit and an audible alarm. It is supplied without a dedicated autopilot instrument: the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the autopilot to your hull. A GHC instrument and Shadow Drive sensor can be added separately if required.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951151694164,"sku":"010-00705-06","price":1208.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-5c65c888.jpg?v=1781903008"},{"product_id":"010-02794-01","title":"Reactor™ 40 Hydraulic Corepack with SmartPump v2 With GHC™ 50 Autopilot Instrument","description":"The Garmin Reactor 40 Hydraulic autopilot with SmartPump v2 and GHC 50 is a complete GPS-stabilised steering system for boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. The included SmartPump v2 combines a brushless electro-hydraulic pump and its control unit in one compact, quiet unit, with Intelligent Rudder Rate Technology that automatically matches steering speed to boat speed. It suits hydraulic cylinders from 4 to 24 cu in with a configurable flow up to 2.4 L per minute, and its built-in Shadow Drive valve lets you take the wheel at any time. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. Dockside and Sea Trial wizards tune performance to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951253897556,"sku":"010-02794-01","price":3414.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/010-02794-01_ghc50_hr_1007.jpg?v=1783022383"},{"product_id":"garmin-reactor-40-hydraulic-autopilot-with-ghc-50-controller-no-pump-010-02794-00","title":"Garmin Reactor 40 Hydraulic Autopilot With GHC 50 Controller (No Pump)","description":"The Garmin Reactor 40 Hydraulic autopilot with GHC 50 delivers GPS-stabilised steering for boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately, while the supplied ECU 10 drives the steering pump. A Shadow Drive sensor suspends autopilot control the instant you turn the wheel and re-engages when you settle on course. Control is through the supplied GHC 50, a 5 in sunlight-readable colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity and wireless remote support. The matching Garmin hydraulic pump is selected separately to suit your cylinder volume. NMEA 2000 connectivity links the system to compatible Garmin chartplotters for waypoint and route navigation, and Dockside and Sea Trial wizards tune performance to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951259304276,"sku":"010-02794-00","price":1588.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-c820a7f6.jpg?v=1781903851"},{"product_id":"reactor-40-kicker-autopilot-with-ghc-50-and-stainless-steel-tilt-tube-010-02794-10","title":"Reactor™ 40 Kicker Autopilot With GHC™ 50 and Stainless Steel Tilt Tube","description":"The Garmin Reactor 40 Kicker autopilot with GHC 50 and stainless steel tilt tube brings GPS-stabilised steering to boats powered by a small kicker or trolling outboard. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. The system steers the outboard with a steering actuator that fits into the motor tilt tube and controls speed with a throttle actuator, so the autopilot can hold a heading hands-free. This pack includes the stainless steel tilt tube the actuator must run in, which is needed on motors whose original tube is not stainless. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952259318100,"sku":"010-02794-10","price":2585.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-1cb1f1d6.png?v=1781904044"},{"product_id":"reactor-40-kicker-autopilot-with-ghc-50-autopilot-instrument-010-02794-09","title":"Reactor™ 40 Kicker Autopilot With GHC™ 50 Autopilot Instrument","description":"The Garmin Reactor 40 Kicker autopilot with GHC 50 brings GPS-stabilised steering to boats powered by a small kicker or trolling outboard. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Instead of a hydraulic pump, this system uses a steering actuator that fits into the motor tilt tube to steer the outboard, plus a throttle actuator that controls the motor speed, so the autopilot can hold a heading hands-free. The steering actuator must be installed in a stainless steel tilt tube for reliable long-term operation. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952308437332,"sku":"010-02794-09","price":2461.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-1e19c4c4.png?v=1781904042"},{"product_id":"reactor-40-kicker-autopilot-010-00705-96","title":"Reactor™ 40 Kicker Autopilot","description":"The Garmin Reactor 40 Kicker autopilot brings GPS-stabilised steering to boats powered by a small kicker or trolling outboard. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Instead of a hydraulic pump, this system uses a steering actuator that fits into the motor tilt tube to steer the outboard, plus a throttle actuator that controls the motor speed, so the autopilot can hold a heading hands-free. The steering actuator must be installed in a stainless steel tilt tube for reliable long-term operation. This corepack is supplied without a dedicated instrument: the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952328786260,"sku":"010-00705-96","price":2152.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-03302910.png?v=1781904043"},{"product_id":"reactor-40-steer-by-wire-standard-corepack-with-ghc-50-autopilot-instrument-010-02794-03","title":"Reactor™ 40 Steer-by-wire Standard Corepack With GHC™ 50 Autopilot Instrument","description":"The Garmin Reactor 40 Steer-by-Wire autopilot with GHC 50 adds GPS-stabilised steering to boats fitted with compatible electronic (steer-by-wire) steering. Instead of a hydraulic pump or mechanical drive, the Reactor 40 CCU connects to the boat steering controller through its CAN bus and commands the existing steering directly, keeping installation simple and clean. The CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. NMEA 2000 connectivity ties the system into compatible Garmin chartplotters for waypoint and route navigation, and Dockside and Sea Trial wizards tune performance to your boat. This version is set up for a standard steer-by-wire steering platform.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952330162516,"sku":"010-02794-03","price":2205.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-7c9e7dd2.png?v=1781904043"},{"product_id":"010-02794-02","title":"Reactor™ 40 Mechanical\/Retrofit\/Solenoid Corepack With GHC™ 50 Autopilot Instrument","description":"The Garmin Reactor 40 Mechanical autopilot with GHC 50 brings GPS-stabilised steering to boats that use a mechanical drive unit or solenoid valve block. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately, while the supplied ECU 10 drives the steering. It is built for retrofit and mixed installations: it connects to a Garmin or compatible mechanical drive, or to a solenoid drive via the appropriate cable, with a three-terminal potentiometer rudder feedback sensor such as the GRF 10 used on non-Garmin drives. A Shadow Drive sensor can be added on hydraulic steering. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. Dockside and Sea Trial wizards tune performance to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952361029972,"sku":"010-02794-02","price":1499.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-79847905.png?v=1781904043"},{"product_id":"reactor-40-kicker-autopilot-010-00705-95","title":"Reactor™ 40 Kicker Autopilot","description":"The Garmin Reactor 40 Kicker autopilot brings GPS-stabilised steering to boats powered by a small kicker or trolling outboard. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Instead of a hydraulic pump, this system uses a steering actuator that fits into the motor tilt tube to steer the outboard, plus a throttle actuator that controls the motor speed, so the autopilot can hold a heading hands-free. The steering actuator must be installed in a stainless steel tilt tube for reliable long-term operation. This corepack is supplied without a dedicated instrument: the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952371351892,"sku":"010-00705-95","price":2073.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-55023009.png?v=1781904043"},{"product_id":"compact-reactor-40-hydraulic-autopilot-with-ghc-50-and-shadow-drive-technology-pack-010-02794-08","title":"Compact Reactor™ 40 Hydraulic Autopilot with GHC™ 50 and Shadow Drive™ Technology Pack","description":"The Garmin Compact Reactor 40 Hydraulic autopilot with GHC 50 and Shadow Drive brings precise, GPS-stabilised steering to boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route with minimal wandering. This pack includes a compact electro-hydraulic pump that drives the steering cylinder, an electronic control unit and an audible alarm. A Shadow Drive sensor in the hydraulic line lets you take the wheel at any time and the autopilot steps aside automatically, re-engaging when you settle back on course. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. NMEA 2000 connectivity links the system to compatible Garmin chartplotters, and Dockside and Sea Trial wizards tune performance to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952439279956,"sku":"010-02794-08","price":1808.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-f6242298.png?v=1781904098"},{"product_id":"garmin-reactor-40-steer-by-wire-standard-corepack-without-ghc-20-010-00705-90","title":"Garmin Reactor 40 Steer-by-wire standard Corepack without GHC 20","description":"The Garmin Reactor 40 Steer-by-Wire autopilot adds GPS-stabilised steering to boats fitted with compatible electronic (steer-by-wire) steering. Instead of a hydraulic pump or mechanical drive, the Reactor 40 CCU connects to the boat steering controller through its CAN bus and commands the existing steering directly, keeping installation simple. The CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. This version is supplied without a dedicated instrument: the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the system to your boat. It is set up for a standard steer-by-wire steering platform.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952441377108,"sku":"010-00705-90","price":1826.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-cdec1e97.jpg?v=1781903072"},{"product_id":"compact-reactor-40-hydraulic-autopilot-with-ghc-50-instrument-pack-with-ghc-50-autopilot-instrument-010-02794-07","title":"Compact Reactor™ 40 Hydraulic Autopilot with GHC™ 50 Instrument Pack With GHC™ 50 Autopilot Instrument","description":"The Garmin Compact Reactor 40 Hydraulic autopilot with GHC 50 brings precise, GPS-stabilised steering to boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route with minimal wandering. This pack includes a compact electro-hydraulic pump that drives the steering cylinder, an electronic control unit and an audible alarm. Control is through the supplied GHC 50, a 5 in sunlight-readable colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. NMEA 2000 connectivity links the system to compatible Garmin chartplotters for waypoint and route navigation, and Dockside and Sea Trial wizards tune performance to your boat. A Shadow Drive sensor for automatic manual takeover can be added separately if required.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952450060628,"sku":"010-02794-07","price":1588.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-d934fbf0.png?v=1781904098"},{"product_id":"reactor-40-steer-by-wire-corepack-for-yamaha-helm-master-with-ghc-50-autopilot-instrument-010-02794-04","title":"Reactor™ 40 Steer-by-wire Corepack for Yamaha® Helm Master® With GHC™ 50 Autopilot Instrument","description":"The Garmin Reactor 40 Steer-by-Wire autopilot with GHC 50 adds GPS-stabilised steering to boats fitted with Yamaha Helm Master electronic steering. Instead of a hydraulic pump or mechanical drive, the Reactor 40 CCU connects to the steering controller through its CAN bus and commands the existing Yamaha steering directly, keeping installation simple and clean. The CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. NMEA 2000 connectivity ties the system into compatible Garmin chartplotters for waypoint and route navigation, and Dockside and Sea Trial wizards tune performance to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952500818260,"sku":"010-02794-04","price":2699.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-95ecc8f3.png?v=1781904043"},{"product_id":"garmin-reactor40-steer-by-wire-corepack-yamaha-helm-master-no-ghc-20-010-00705-91","title":"Garmin Reactor40 Steer-by-wire Corepack Yamaha Helm Master no GHC 20","description":"The Garmin Reactor 40 Steer-by-Wire autopilot adds GPS-stabilised steering to boats fitted with Yamaha Helm Master electronic steering. Instead of a hydraulic pump or mechanical drive, the Reactor 40 CCU connects to the steering controller through its CAN bus and commands the existing Yamaha steering directly, keeping installation simple. The CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Supplied without a dedicated instrument, the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952501834068,"sku":"010-00705-91","price":2320.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-aa3e598e.jpg?v=1781903072"},{"product_id":"reactor-40-steer-by-wire-corepack-for-volvo-penta-with-ghc-50-autopilot-instrument-010-02794-06","title":"Reactor™ 40 Steer-by-wire Corepack for Volvo-Penta® With GHC™ 50 Autopilot Instrument","description":"The Garmin Reactor 40 Steer-by-Wire autopilot with GHC 50 adds GPS-stabilised steering to boats fitted with Volvo Penta electronic steering. Instead of a hydraulic pump or mechanical drive, the Reactor 40 CCU connects to the steering controller through its CAN bus and commands the existing Volvo Penta steering directly, keeping installation simple and clean. The CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Control is through the supplied GHC 50, a 5 in colour touchscreen instrument with NMEA 2000, Wi-Fi and ANT+ connectivity. NMEA 2000 connectivity ties the system into compatible Garmin chartplotters for waypoint and route navigation, and Dockside and Sea Trial wizards tune performance to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952503144788,"sku":"010-02794-06","price":4173.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-d1455439.png?v=1781904044"},{"product_id":"garmin-class-b-hydraulic-linear-drive-unit-010-11573-00","title":"Garmin Class B Hydraulic Linear Drive Unit","description":"\u003cp\u003eThe Garmin Class B Hydraulic Linear Drive Unit is a self-contained hydraulic drive that steers the rudder of a sailboat under the command of a compatible Garmin autopilot. The ram, pump and reservoir are filled and tested at the factory, so no hydraulic lines need to be opened during installation. A solenoid clutch extends and retracts the rod to drive the tiller arm or quadrant.\u003c\/p\u003e\u003cp\u003eThe supplied rudder feedback sensor reports rudder position to the autopilot for precise steering, and serviceable motor brushes help ensure a long working life. The drive must be mounted under deck and limited by physical rudder end stops to prevent overtravel.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952503767380,"sku":"010-11573-00","price":1929.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-9123f761.jpg?v=1781902586"},{"product_id":"garmin-class-a-mechanical-linear-drive-unit-010-11572-00","title":"Garmin Class A Mechanical Linear Drive Unit","description":"\u003cp\u003eThe Garmin Class A Mechanical Linear Drive Unit is a self-contained linear actuator that steers the rudder of a sailboat under the command of a Garmin GHP or Reactor autopilot. It connects directly to a quadrant or tiller arm and extends and retracts to move the rudder, drawing only a low average current during normal steering.\u003c\/p\u003e\u003cp\u003eAn integrated electromagnetic clutch engages when the autopilot is active and releases the moment it is disengaged, so the helmsman can take back manual control instantly. The drive must be fitted under deck in a dry location and protected with physical rudder end stops to avoid overtravel.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952528900436,"sku":"010-11572-00","price":1682.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-8d650295.jpg?v=1781902586"},{"product_id":"garmin-reactor-40-steer-by-wire-corepack-for-volvo-without-ghc-20-010-00705-93","title":"Reactor™ 40 Steer-by-wire Corepack for Volvo-Penta® Without GHC™ Autopilot Instrument","description":"The Garmin Reactor 40 Steer-by-Wire autopilot adds GPS-stabilised steering to boats fitted with Volvo Penta electronic steering. Instead of a hydraulic pump or mechanical drive, the Reactor 40 CCU connects to the steering controller through its CAN bus and commands the existing Volvo Penta steering directly, keeping installation simple. The CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. Supplied without a dedicated instrument, the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952557474132,"sku":"010-00705-93","price":3794.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-360ca303.jpg?v=1781903072"},{"product_id":"garmin-reactor-40-hydraulic-autopilot-without-ghc-20-010-00705-21","title":"Garmin Reactor 40 Hydraulic Autopilot without GHC 20","description":"The Garmin Reactor 40 Hydraulic autopilot brings GPS-stabilised steering to boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route, while the supplied ECU 10 drives the steering pump. A Shadow Drive sensor is included to suspend autopilot control whenever you turn the wheel and resume once you hold a steady heading. This version is supplied without a dedicated autopilot instrument: the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also provides waypoint and route data. The matching Garmin hydraulic pump is selected separately to suit your steering cylinder. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952558162260,"sku":"010-00705-21","price":1200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-9a9d4248.jpg?v=1781903073"},{"product_id":"garmin-reactor-40-corepack-without-ghc-20-010-00705-48","title":"Garmin Reactor 40 Corepack without GHC 20","description":"The Garmin Reactor 40 autopilot corepack supplies the essential building blocks of a GPS-stabilised marine autopilot. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately, while the supplied ECU 10 drives the steering pump or actuator. A Shadow Drive sensor is included for automatic manual takeover on hydraulic steering systems. This corepack is supplied without a dedicated autopilot instrument, so the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Pair the corepack with a Garmin hydraulic pump or drive chosen to suit your boat. Dockside and Sea Trial wizards tune the system to your hull.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952600170836,"sku":"010-00705-48","price":1120.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-895d58e0.jpg?v=1781903072"},{"product_id":"garmin-reactor-40-hydraulic-corepack-with-smartpump-010-00705-78","title":"Garmin Reactor 40 Hydraulic Corepack with SmartPump","description":"The Garmin Reactor 40 Hydraulic autopilot with SmartPump v2 delivers GPS-stabilised steering for boats with hydraulic helms. The Reactor 40 CCU is a solid-state course computer that senses heading, attitude and rate of turn to hold a course or follow a route accurately. The included SmartPump v2 combines a brushless electro-hydraulic pump and its control unit in a single compact, quiet unit, with Intelligent Rudder Rate Technology that automatically matches steering speed to boat speed. It suits hydraulic cylinders from 4 to 24 cu in with a configurable flow up to 2.4 L per minute, and its built-in Shadow Drive valve allows instant manual takeover. Supplied without a dedicated instrument, the CCU connects to a NMEA 2000 network and is controlled from a compatible Garmin chartplotter, which also feeds it waypoint and route data. Dockside and Sea Trial wizards tune the system to your boat.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953103782228,"sku":"010-00705-78","price":2911.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-cec08098.gif?v=1781903236"},{"product_id":"garmin-smartpump-v2-010-00705-62","title":"Garmin SmartPump v2","description":"The Garmin SmartPump v2 is a hydraulic drive unit for Garmin Reactor marine autopilots, combining the pump, motor and electronic control unit (ECU) in a single compact assembly. It interacts with your existing hydraulic steering system to steer the boat on commands from the autopilot, and is designed to suit most vented-reservoir installations.\n\nFive SAE ORB-5 ports (H1, H2, C1, C2 and a return) give flexibility when plumbing the pump into single, dual-helm and power-assist layouts, and the unit can be reconfigured for boats with an unbalanced steering cylinder. Colour-coded electrical connectors simplify wiring, and a wide 10 to 30 Vdc input range with a 40 A blade fuse suits 12 and 24 V systems. Built from aluminium alloy with a fully-gasketed ECU and carbon-steel bracket, the SmartPump v2 is engineered for the marine environment; Garmin recommends an annual application of corrosion-inhibitor spray to extend its life.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953320673620,"sku":"010-00705-62","price":2074.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-ecc66864.gif?v=1781903235"},{"product_id":"010-12029-01","title":"Garmin Class B Compact v2 Drive Unit","description":"\u003cp\u003eThe Garmin Class B Compact Drive Unit (v2) is a compact, self-contained linear drive for sailing vessels using a Garmin autopilot. It bolts to a quadrant or tiller arm and extends and retracts to steer the rudder, with an integrated position feedback sensor that removes the need for a separate rudder feedback unit on many installations.\u003c\/p\u003e\u003cp\u003eSealed to IP67 and regulated by the autopilot at 12 Vdc, it provides up to 6,900 N of intermittent thrust within a 254 mm stroke. The drive must be installed under deck and limited by physical rudder end stops, and it can be removed from its base for service when required.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55971564683604,"sku":"010-12029-01","price":1529.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/230-0101202901.jpg?v=1783022114"}],"url":"https:\/\/hudsonmarine.co.uk\/collections\/garmin-autopilot-drive-units.oembed","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}