Garmin 3m 12pin Transducer Extension Cable
Manufacturer Part No:
010-11617-32 |
£30.46 ex-VAT
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
Garmin Kayak In Hull Transducer Mount
Our versatile in-hull transducer mounting solution for kayaks allows fishermen to get out on the water with their favourite Garmin equipment. The mount fits the Garmin dual beam transducer (77/200 kHz) and GT20-TM transducer (77/200 kHz/DownVu), and is for use with compatible fishfinder and combo ma...
£21.29 ex-VAT
Garmin Fairing Block
Use our fairing block to position your Garmin GT21, GT23, GT41, GT50 or GT51 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise angle of your mounting location exceeds 5 degrees, you should use a fairing block to mount the device.
£57.19 ex-VAT
Transducer Extension Cable 8-pin 10ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£32.13 ex-VAT
Garmin Y Dual 4 Pin Sounder to 12 Pin Transducer Adapter Cable
Use this adapter cable when connecting a compatible 12-pin transducer to a compatible dual 4-pin Garmin device.
£24.63 ex-VAT
Garmin Transducer Extension Cable 8-pin 30ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£44.63 ex-VAT
Garmin 10ft DownVu Transducer Extension Cable 12 pin
Garmin 10ft DownVu Transducer Extension Cable 12 pin
£30.83 ex-VAT
Garmin 30ft DownVu Transducer Extension Cable 12 pin
Garmin 30ft DownVu Transducer Extension Cable 12 pin.
£37.96 ex-VAT
Garmin Y Dual 4 Pin Sounder to 8 Pin Transducer Adapter Cable
Sorry no longer available
Use this adapter cable to connect a Garmin 8-pin single/dual beam transducer to a Garmin 4-pin/dual 4 pin echo/STRIKER series fishfinder.
Garmin 12 Pin Y-Cable for Port and Starboard GT Transducers
Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
£42.23 ex-VAT
Mounting Hardware for Thru-Hull Transducers
Install your Garmin thru-hull scanning transducer easily with this mounting hardware. Includes an isolation plate, bushings, anti-rotation bolts, washers and nuts.
£35.20 ex-VAT
Garmin Heavy Duty Transom Mount 4 8 12-pin Transducers
Easily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount, which provides excellent sonar returns at all speeds. Since the transducer is in the water at all times, the mount does not protect the transducer from underwater obstructions and some drag on the...
Garmin 3m 12pin Transducer Extension Cable
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
£30.46 ex-VAT
Garmin 30ft Xdcr Extension Cable 12 pin with XID
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.
£40.46 ex-VAT
Garmin Trolling Motor Mount
Easily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions and easy mounting.
£15.83 ex-VAT
Garmin Transom Trolling Motor Mount
Easily attach your compatible transducer to the transom or trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions and easy mounting.
£15.83 ex-VAT
Garmin 0 Degree In-Hull Mount GT15 Mount Replacement
Mount your compatible scanning transducer to the inside of your fiberglass boat’s hull. Four different mounts are offered to accommodate hull deadrises between 0 and 24 degrees.
£15.83 ex-VAT
Garmin 5 Degree In-Hull Mount GT15 Mount Replacement
Mount your compatible scanning transducer to the inside of your fiberglass boat’s hull. Four different mounts are offered to accommodate hull deadrises between 0 and 24 degrees.
£15.83 ex-VAT
Garmin 12 Degree In-Hull Mount GT15 Mount Replacement
Mount your compatible scanning transducer to the inside of your fiberglass boat’s hull. Four different mounts are offered to accommodate hull deadrises between 0 and 24 degrees.
£15.83 ex-VAT
Garmin 20 Degree In-Hull Mount GT15 Mount Replacement
Mount your compatible scanning transducer to the inside of your fiberglass boat’s hull. Four different mounts are offered to accommodate hull deadrises between 0 and 24 degrees.
£15.83 ex-VAT
Garmin Trolling Motor Mount for DownVu Transducer
Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.
£19.36 ex-VAT
Step Plate Mount for DownVu sideVu Transducer
Easily attach your compatible 4-, 8- or 12-pin transducer to the step of your boat with this mount, which provides excellent sonar returns at low speeds. The mount protects the transducer from underwater obstructions and creates no drag on the boat. And since the transducer is out of the water, sona...
£19.36 ex-VAT
Garmin Jack Plate Mount for DownVu or SideVu Transducer
Easily attach your compatible 4-, 8- or 12-pin scanning transducer to the jack plate of your boat with this mount, which provides excellent sonar returns at low speeds. The mount protects the transducer from underwater obstructions and creates no drag on the boat all while allowing angle adjustment...
£19.36 ex-VAT
Garmin 4 pin Transducer to 8 pin Sounder Adapter Cable
Use this adapter cable to connect a 4-pin transducer to a 8-pin sounder.
£14.58 ex-VAT
Garmin 8-pin Transducer to 4-pin Sounder Adapter Cable
Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.
£16.29 ex-VAT
Garmin GPSMAP J1939 Network Cable
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.
£74.17 ex-VAT
Garmin Remote Input Device, GRID, Keypad and Joystick for Controlling Compatable Monitors and MFDs
Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to seamlessly navigate between monitors at a station - all while controlling single or multiple compatible monitors an...
£264.63 ex-VAT
Garmin Wireless remote Control for Compatable MFDs
Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).
Garmin Trunnion or Bail Mount with Knobs for GPSMAP 7407
Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.
£21.67 ex-VAT
Garmin Flush Mount Kit for GPSMAP 7407
Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.
£16.67 ex-VAT
Garmin Trim Piece Snap Covers for GPSMAP 7407
Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.
£11.67 ex-VAT
Garmin Protective Sun Cover for GPSMAP 7407
Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.
£16.67 ex-VAT
Garmin Micro SD Card Door for GPSMAP 7407
Secure and protect the memory card in your compatible marine device with this SD door.
£11.67 ex-VAT
Garmin 12 Pin Right Angle Transducer Adapter Cable
Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.
£22.96 ex-VAT
Transducer Extension Cable 8-pin 10ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£32.13 ex-VAT
Garmin Transducer Extension Cable 8-pin 30ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£44.63 ex-VAT
Garmin 12 Pin Y-Cable for Port and Starboard GT Transducers
Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
£42.23 ex-VAT
Garmin 3m 12pin Transducer Extension Cable
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
£30.46 ex-VAT
Garmin 30ft Xdcr Extension Cable 12 pin with XID
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.
£40.46 ex-VAT
Transducer Adapter 8-Pin Right Angle
This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
£23.33 ex-VAT
Transducer Adapter 12-Pin Right Angle
This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
Garmin 8-pin Transducer to 12-pin Sounder Adapter Cable with XID
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
£16.29 ex-VAT
Garmin GPSMAP Power Cable and Data Cable 8 pin
Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.
£19.36 ex-VAT
Garmin GPSMAP J1939 Network Cable
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.
£74.17 ex-VAT
Garmin Remote Input Device, GRID, Keypad and Joystick for Controlling Compatable Monitors and MFDs
Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to seamlessly navigate between monitors at a station - all while controlling single or multiple compatible monitors an...
£264.63 ex-VAT
Garmin Wireless remote Control for Compatable MFDs
Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).
Garmin Trunnion or Bail Mount with Knobs for GPSMAP 7408
Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.
£21.67 ex-VAT
Garmin Flush Mount Kit for GPSMAP 7408
Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.
£18.33 ex-VAT
Garmin Trim Piece Snap Covers for GPSMAP 7408
Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.
£11.67 ex-VAT
Garmin Protective Sun Cover for GPSMAP 7408
Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.
£16.67 ex-VAT
Garmin Micro SD Card Door for GPSMAP 7408 7410 7412 7416
Secure and protect the memory card in your compatible marine device with this SD door.
£11.67 ex-VAT
Garmin 12 Pin Right Angle Transducer Adapter Cable
Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.
£22.96 ex-VAT
Transducer Extension Cable 8-pin 10ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£32.13 ex-VAT
Garmin Transducer Extension Cable 8-pin 30ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£44.63 ex-VAT
Garmin 12 Pin Y-Cable for Port and Starboard GT Transducers
Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
£42.23 ex-VAT
Garmin 3m 12pin Transducer Extension Cable
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
£30.46 ex-VAT
Garmin 30ft Xdcr Extension Cable 12 pin with XID
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.
£40.46 ex-VAT
Transducer Adapter 8-Pin Right Angle
This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
£23.33 ex-VAT
Transducer Adapter 12-Pin Right Angle
This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
Garmin 8-pin Transducer to 12-pin Sounder Adapter Cable with XID
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
£16.29 ex-VAT
Garmin GPSMAP Power Cable and Data Cable 8 pin
Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.
£19.36 ex-VAT
Garmin GPSMAP J1939 Network Cable
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.
£74.17 ex-VAT
Garmin Remote Input Device, GRID, Keypad and Joystick for Controlling Compatable Monitors and MFDs
Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to seamlessly navigate between monitors at a station - all while controlling single or multiple compatible monitors an...
£264.63 ex-VAT
Garmin Wireless remote Control for Compatable MFDs
Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).
Garmin Trunnion or Bail Mount with Knobs for GPSMAP 7410
Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.
£24.63 ex-VAT
Garmin Flush Mount Kit for GPSMAP 7410
Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.
£18.33 ex-VAT
Garmin Trim Piece Snap Covers for GPSMAP 7410
Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.
£11.67 ex-VAT
Garmin Protective Sun Cover for GPSMAP 7410
Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.
£17.96 ex-VAT
Garmin Micro SD Card Door for GPSMAP 7408 7410 7412 7416
Secure and protect the memory card in your compatible marine device with this SD door.
£11.67 ex-VAT
Garmin 12 Pin Right Angle Transducer Adapter Cable
Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.
£22.96 ex-VAT
Transducer Extension Cable 8-pin 10ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£32.13 ex-VAT
Garmin Transducer Extension Cable 8-pin 30ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£44.63 ex-VAT
Garmin 12 Pin Y-Cable for Port and Starboard GT Transducers
Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
£42.23 ex-VAT
Garmin 3m 12pin Transducer Extension Cable
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
£30.46 ex-VAT
Garmin 30ft Xdcr Extension Cable 12 pin with XID
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.
£40.46 ex-VAT
Transducer Adapter 8-Pin Right Angle
This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
£23.33 ex-VAT
Transducer Adapter 12-Pin Right Angle
This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
Garmin 8-pin Transducer to 12-pin Sounder Adapter Cable with XID
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
£16.29 ex-VAT
Garmin GPSMAP Power Cable and Data Cable 8 pin
Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.
£19.36 ex-VAT
Garmin GPSMAP J1939 Network Cable
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.
£74.17 ex-VAT
Garmin Remote Input Device, GRID, Keypad and Joystick for Controlling Compatable Monitors and MFDs
Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to seamlessly navigate between monitors at a station - all while controlling single or multiple compatible monitors an...
£264.63 ex-VAT
Garmin Wireless remote Control for Compatable MFDs
Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).
Garmin Trunnion or Bail Mount with Knobs for GPSMAP 7412
Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.
£21.67 ex-VAT
Garmin Flush Mount Kit for GPSMAP 7412
Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.
£21.67 ex-VAT
Garmin Trim Piece Snap Covers for GPSMAP 7412
Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.
£11.67 ex-VAT
Garmin Protective Sun Cover for GPSMAP 7412
Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.
Garmin Micro SD Card Door for GPSMAP 7408 7410 7412 7416
Secure and protect the memory card in your compatible marine device with this SD door.
£11.67 ex-VAT
Garmin 12 Pin Right Angle Transducer Adapter Cable
Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.
£22.96 ex-VAT
Transducer Extension Cable 8-pin 10ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£32.13 ex-VAT
Garmin Transducer Extension Cable 8-pin 30ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£44.63 ex-VAT
Garmin 12 Pin Y-Cable for Port and Starboard GT Transducers
Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
£42.23 ex-VAT
Garmin 3m 12pin Transducer Extension Cable
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
£30.46 ex-VAT
Garmin 30ft Xdcr Extension Cable 12 pin with XID
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.
£40.46 ex-VAT
Transducer Adapter 8-Pin Right Angle
This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
£23.33 ex-VAT
Transducer Adapter 12-Pin Right Angle
This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
Garmin 8-pin Transducer to 12-pin Sounder Adapter Cable with XID
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
£16.29 ex-VAT
Garmin GPSMAP Power Cable and Data Cable 8 pin
Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.
£19.36 ex-VAT
Garmin GPSMAP J1939 Network Cable
Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.
£74.17 ex-VAT
Garmin Remote Input Device, GRID, Keypad and Joystick for Controlling Compatable Monitors and MFDs
Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to seamlessly navigate between monitors at a station - all while controlling single or multiple compatible monitors an...
£264.63 ex-VAT
Garmin Wireless remote Control for Compatable MFDs
Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).
Garmin Trunnion or Bail Mount with Knobs for GPSMAP 7416
Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.
£35.00 ex-VAT
Garmin Flush Mount Kit for GPSMAP 7416
Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.
£21.67 ex-VAT
Garmin Trim Piece Snap Covers for GPSMAP 7416
Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.
£11.67 ex-VAT
Garmin Protective Sun Cover for GPSMAP 7416
Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.
£18.33 ex-VAT
Garmin Micro SD Card Door for GPSMAP 7408 7410 7412 7416
Secure and protect the memory card in your compatible marine device with this SD door.
£11.67 ex-VAT
Garmin 12 Pin Right Angle Transducer Adapter Cable
Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.
£22.96 ex-VAT
Transducer Extension Cable 8-pin 10ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£32.13 ex-VAT
Garmin Transducer Extension Cable 8-pin 30ft
Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.
£44.63 ex-VAT
Garmin 12 Pin Y-Cable for Port and Starboard GT Transducers
Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.
£42.23 ex-VAT
Garmin 3m 12pin Transducer Extension Cable
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.x
£30.46 ex-VAT
Garmin 30ft Xdcr Extension Cable 12 pin with XID
Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.
£40.46 ex-VAT
Transducer Adapter 8-Pin Right Angle
This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
£23.33 ex-VAT
Transducer Adapter 12-Pin Right Angle
This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.
Garmin 8-pin Transducer to 12-pin Sounder Adapter Cable with XID
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
£16.29 ex-VAT
Garmin GPSMAP Power Cable and Data Cable 8 pin
Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.
£19.36 ex-VAT
