![Raymarine AIS700 Class B Transceiver With Integrated Splitter](https://media.hudsonmarine.co.uk/uploads/Raymarine/AIS/E70476-Raymarine-AIS700-Class-B-Transceiver-With-Integrated-Splitter.jpg)
Raymarine AIS700 Class B Transceiver With Integrated Splitter
The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.
![](https://d1ftp75gsnhq96.cloudfront.net/uploads/Raymarine/AIS/AIS700-In-the-Box.jpg)
Parts supplied
1. AIS700
2. GNSS antenna
3. Power/data cable 2m (6.56 ft)
4. VHF Radio cable 1m (3.28 ft)
5. DeviceNet to SeaTalkng ® adaptor cable 1m (3.28 ft)
6. GNSS antenna gasket
7. GNSS antenna pole mount
8. Unit fixings (4 x No.8x19 self tapping screws)
9. M5 nut and washer (grounding)
10. Documentation
11. GNSS antenna fixings (3 x M3x40 stud and thumb
nut)
12. Software CD
ENVIRONMENTAL SPECIFICATIONS
Operating temperature | -15°C to +55°C |
Storage temperature | -20°C to +75°C |
Water ingress | IPX6 and IPX7 |
Humidity | Up to 93% @ 40°C |
POWER SPECIFICATIONS
Power Supply | 12v and 24 nominal |
Power Consumption | <3W |
Peak current | 3A |
Load Equivalency Number | 1 LEN |
RF SPECIFICATIONS
DSC Receiver | Implemented by time sharing with one TDMA receiver |
Receiver 1 band | 156.025 MHz to 162.025 MHz (in 25KHz steps) |
Receiver 2 band | 156.025 MHz to 162.025 MHz (in 25KHz steps) |
Transmitter band | 156.025 MHz to 162.025 MHz (in 25KHz steps) |
Transmitter specification | To meet IEC 62287-2 relevant sections |
Receiver specification | To meet IEC 62287-2 relevant sections |
Transceiver specification | To meet IEC 62287-2 relevant sections |
GPS receiver | u-blox MAX-M8W |
GPS receiver channels | 72 channels |
GPS Cold start acquisition time | 26s nominal |
Positional source | GPS & GLONASS |
AIS performance | 5W SOTDMA |
ANTENNA SPLITTER SPECIFICATIONS
Operating frequency range | 156.0MHz to 162.025MHz Transmitting 156.0MHz to 174.0Mhz Receiving |
Insertion loss AIS RX path | 0dB |
Insertion loss AIS TX path | <1dB |
Insertion loss VHF RX path | 0dB |
Insertion loss VHF TX path | <1dB |
Power handling AIS port | Maximum 5W input |
Power handling VHF port | 25W input |
Switching time RX to VHF TX | 10uS Max |
Switching time RX to AIS TX | 10uS Max |
Switching time VHF TX to AIS TX | 10uS Max |
Switching time any TX to RX | 10uS Max |
VHF port impedance | 50 Ohms |
AIS port impedance | 50 Ohms |
Antenna port impedance | 50 Ohms |
VHF to AIS port isolation | >28dB (both directions) |
Minimum VHF input power for switching | 400mW |
EXTERNAL CONNECTIONS
VHF antenna connector type | SO-239 co-axial |
VHF radio connector type | SO-239 co-axial |
GNSS antenna connector | 50Ω TNC co-axial |
NMEA2000 | DeviceNet male |
USB | Micro-B |
External interface isolation | NMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification. |
NMEA0183 interface 1 (MFD connection) | NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS. |
NMEA0183 interface 2 (NMEA0183 instrument connection) | NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate |
USB interface (PC connection) | Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud |
Raymarine AIS350 Dual Channel Receiver
£414.63 ex-VAT
Raymarine AIS650 Class B Transceiver
Raymarine AIS700 Class B Transceiver With Integrated Splitter
£814.97 ex-VAT
Raymarine AIS700 Class B Transceiver With Integrated Splitter -Refurbished
£672.19 ex-VAT