Garmin Networking NMEA 2000
Garmin NMEA2000 starter kit
Our starter kit has everything you need to build a basic NMEA2000 Micro-C network on your boat. The kit includes a 2m drop cable, a 6m backbone cable, a 2m power cable, 2 Tee piece connectors, a male terminator and a female terminator.
£67.47 ex-VAT
Garmin NMEA2000 Network Updater
Our NMEA2000 network updater provides the convenience of updating Garmin products and NMEA2000 accessories that do not have a SD card slot. Simply download a software update to an SD card and insert the card into the network updater. Using a simple plug and play installation, the network updater eas...
£57.96 ex-VAT
Garmin NMEA2000 Backbone Drop or Spur Cable 30cm
Extend your Micro-C NMEA2000 backbone with Garmins 1ft (30cm) backbone or drop cable / spur cable.
£12.96 ex-VAT
Garmin NMEA2000 Drop or Spur Cable 30cm with Right Angle Female Connector
For connecting to Instruments and other NMEA2000 devices where there is not enough depth behind them for the standard straight Micro-C plug.
£19.36 ex-VAT
Garmin NMEA2000 Backbone, Drop or Spur Cable 2m
Extend your Micro-C NMEA2000 backbone with Garmin's 6ft (2m) backbone or drop cable / spur cable.
£16.29 ex-VAT
Garmin NMEA2000 Backbone Drop or Spur Cable 4m
Extend your Micro-C NMEA2000 backbone with Garmin's 13ft (4m) backbone or drop cable / spur cable.
£19.63 ex-VAT
Garmin NMEA2000 Backbone Drop or Spur Cable 6m
Extend your Micro-C NMEA2000 backbone with Garmin's 19ft (6m) backbone or drop cable / spur cable.
£22.96 ex-VAT
Garmin NMEA2000 Backbone Cable 10m
Extend your Micro-C NMEA2000 backbone with Garmin's 32ft (10m) backbone cable. Drop Cables or Spurs can be a maximum of 6 metres.
£27.13 ex-VAT
Garmin NMEA2000 Backbone Cable 30m, Replacement Mast Cable for GWS 10 Wind Transducer
Extend your Micro-C NMEA2000 backbone with Garmins 97ft (30m) backbone cable. This cable was intended to connect the Garmin GMX 10 Wind transducer to the backbone.
£88.00 ex-VAT
Garmin Right angle NMEA 2000 cable
Extend your NMEA 2000 backbone with our 6 foot (1.82 m) right angle backbone cable.
£19.36 ex-VAT
4-pin Female to 5-pin Male NMEA 2000 Adapter Cable
Extend your Micro-C NMEA2000 backbone with Garmin's 6ft (2m) backbone or drop cable / spur cable.
£19.36 ex-VAT
Garmin NMEA2000 Power Isolator
Use our NMEA2000 power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA2000 network.
£15.46 ex-VAT
Garmin NMEA2000 Tee Connector
Add components to your NMEA2000 network by installing our T-connector on your backbone cable.
£12.96 ex-VAT
Garmin NMEA2000 Power Cable
Supply power to your NMEA2000 network with our 6 foot (2 m) power cable.
£12.96 ex-VAT
Garmin NMEA2000 Terminator Male
This standard male NMEA2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.There should only EVER be 2 terminators on any backbone.
£5.79 ex-VAT
Garmin NMEA2000 Terminator Female
This standard female NMEA2000 light cable connector provides termination resistance for one end of the backbone of the network. Each male or female connector sold separately.There should only EVER be 2 terminators on any backbone.
£5.79 ex-VAT
Garmin NMEA2000 Field Installation Male Connector
Use Garmin's male NMEA2000 Micro-C field-installable connectors to create custom-length drop cables and backbone extension cables. No soldering required, screw terminals. Available in male or female, these connectors (sold separately) also can be used to shorten any NMEA2000 drop/backbone cable.
£22.96 ex-VAT
Garmin NMEA2000 Field Installation Female Connectorr
Use Garmins female NMEA2000 Micro-C field-installable connectors to create custom-length drop cables and backbone extension cables. No soldering required, screw terminals. Available in male or female, these connectors (sold separately) also can be used to shorten any NMEA2000 drop/backbone cable.
£22.96 ex-VAT
Garmin NMEA2000 Inline Terminator Male
Use Garmin's inline terminator between the backbone cable and your compatible device to neatly terminate the network without a Tee piece and standard terminator.
£17.13 ex-VAT
Garmin Analogue Depth Transducer to NMEA2000 Adapter Kit
Save both time and money by upgrading your depth transducer to the NMEA2000 network without hauling your boat out of the water. Use our kit to adapt depth information, which is currently provided by a compatible 200 kHz transducer on a boat, to the NMEA2000 network. Once adapted, you can observe dep...
Garmin GRA 10 Analogue Rudder Angle Sender to NMEA2000 Adapter
With the GRA 10 Rudder Angle Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA2000 signal so you can creat...
£138.29 ex-VAT
Garmin GET 10 Analogue Engine Tilt Sender to NMEA2000 Adapter
With the GET 10 Engine Tilt/Trim Analogue Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analogue to digital. This simple-to-install adapter takes the data generated by traditional analogue gauges and converts the data into a NMEA2000 signal so you...
£138.29 ex-VAT
Garmin GFL 10 Analogue Fluid Level Sender to NMEA2000 Adapter
With the GFL 10 Fluid Level Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000® signal so you can...
£138.29 ex-VAT
Garmin GBT 10 Analogue Bennett Trim Tab Sender to NMEA2000 Adapter
With the GBT 10 Trim Tab Analogue Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analogue to digital. This simple-to-install adapter takes the data generated by traditional analogue gauges and converts the data into a NMEA2000 signal so you can cre...
£133.29 ex-VAT
Garmin GST 10 Analogue Water Speed and Temperature Adapter
With the GST 10 Water Speed and Temperature Analogue Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analogue to digital. This simple-to-install adapter takes the data generated by traditional analogue gauges and converts the data into a NMEA2000 (5...
£114.97 ex-VAT
Garmin GFS 10 NMEA2000 Petrol Fuel Flow Sensor
Add fuel tracking capabilities to your Garmin chartplotter and optimize your boats fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA2000. Unlike other fuel flow sensors, the GFS 10 will include fuel level sensing capability when connec...
£123.29 ex-VAT
Garmin NMEA2000 Network Updater
Our NMEA2000 network updater provides the convenience of updating Garmin products and NMEA2000 accessories that do not have a SD card slot. Simply download a software update to an SD card and insert the card into the network updater. Using a simple plug and play installation, the network updater eas...
£57.96 ex-VAT
Garmin GNT 10 NMEA 2000 Transceiver
The GNT 10 provides the ability to transmit NMEA2000 data over the wireless ANT network to compatible devices, such as quatix, our GPS-enabled marine navigation watch.
