Seaview Modular Radome Mounts
STEP 1 - Select which type of mount you want, for example radar mount, open array radar mount, satdome mount, camera mount, dual mount etc.
STEP 2 - Choose which Seaview Top Plate is correct for your marine electronic. A Seaview Top Plate must be used in order to mount your marine electronic to a Seaview Modular Mount, and is sold separately. These Top Plates fit major brands such as Garmin, Raymarine, FLIR, Intellian, KVH, Simrad and more!
STEP 3 - Pick optional accessories, such as light bars, light bar tops, wedges, hinges and spreader kits.
Step 1 - Choose Base Mount
Seaview 5 inch high Aft leaning Radome Radar Base Mount
This Seaview Modular Mount works with open array radars. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Oval hollow mast section allows for easy cable management.
Both forward and aft leaning styles are 5&quo...
£185.00 ex-VAT
Seaview 10 inch high Aft leaning Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar compatible...
£271.67 ex-VAT
Seaview 16 inch high Aft leaning Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£293.33 ex-VAT
Seaview 24 inch high Aft leaning Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£322.50 ex-VAT
Seaview 36 inch high Aft leaning Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£380.00 ex-VAT
Seaview 5 inch high forward leaning Radome Radar Modular Base Mount
This Seaview Modular Mount works with open array radars. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Oval hollow mast section allows for easy cable management.
Both forward and aft leaning styles are 5&quo...
£185.00 ex-VAT
Seaview 10 inch high forward leaning Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£271.67 ex-VAT
Seaview 5 inch high Vertical Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£247.50 ex-VAT
Seaview 12 inch high Vertical Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£275.00 ex-VAT
Seaview 18 inch high Vertical Radome Radar Modular Base Mount
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point.
7 inch x 7 inch base plate. A Seaview Modular Top Plate Step 2 is required and sold separately. Light bar...
£311.67 ex-VAT
STEP 2 - CHOOSE TOP PLATE
Seaview Top Plate Suitable for Radome Radars and Open Array Radars. M1 Bases
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts ending in "M1" (ex: PMA-57-M1). These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting scre...
£119.17 ex-VAT
Modular Top Plate for 24 inch JRC. Lowrance 2400HD. Northstar & Simrad DX64S Radomes
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts ending in "M1" (ex: PMA-57-M1). These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting scre...
£112.50 ex-VAT
Simrad Halo Open Array Radar Adapter Plate. Must be used with ADA-R1
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts ending in "M1" (ex: PMA-57-M1). These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting scre...
£113.33 ex-VAT
STEP 3 - CHOOSE OPTIONAL ACCESSORIES
1. 1/4 inch Light bar for 18 to 24 inch closed dome radar. folds over 90 deg
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights,...
£89.17 ex-VAT
1. 1/4 inch Light bar for open array radar up to 4.5 ft. Must pick a LTB TOP below
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights,...
£277.50 ex-VAT
1 1/4 inch Light bar for 18 inch or smaller satdomes. folds over 90 deg. Must pick a LTB TOP below
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights,...
£160.00 ex-VAT
Light bar for FLIR thermal cameras and light. Must pick a LTB TOP. M2 mount only. NOT for high speed boats
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights,...
£470.83 ex-VAT
LTB TOP. Standard 1-14 thread for GPS or similar
Adapter to mount a GPS unit or wind transducer. Uses standard 1-14 threads.
£6.67 ex-VAT
LTB TOP Universal Light bar top for mounting your own light and or GPS
Universal light bar top for mounting your own light and or GPS unit. (Light and electronics not included)
£40.83 ex-VAT
LTB TOP Perko 1197 light with 7ft of wire. USCG approved for boats up to 20 meters or 65. 6 ft in or length.
Perko 1197 Anchor light and 7' of wire (12v). Can be converted to 24v. USCG approved for boats up to 20 meters (65.6') in length.
£73.33 ex-VAT
LTB TOP Universal box top for All-round, Masthead & Stern. Note lights not included
Universal box top for all-round, masthead and stern (lights not included).
£58.33 ex-VAT
Light bar adapter to mount a light and 2 GPS. Electronics not included
Light bar adapter to mount a light and 2 GPS units. (Light and electronics not included)
£135.83 ex-VAT
Complete spreader kit for radar or satdome application. Fits Seaview Modular Mounts ending in “M1”. For example PMA-57-M1
This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All...
£366.67 ex-VAT
Complete spreader kit for radar or satdome application. Fits Seaview Modular Mounts ending in “M2”. For example PMA-DM1-M2
This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All...
£388.33 ex-VAT
S.S. 1-14 threaded insert for spreader kits
Stainless steel 1-14 threaded insert for Seaview Spreader Kits. This insert replaces the plastic threaded insert that comes with Seaview Spreader Kits. By using this stainless steel threaded insert you can use 4' or taller fiberglass antennas on all Seaview Spreader Kits.
£62.50 ex-VAT
4 degree wedge for 7 inch x7 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£73.33 ex-VAT
4 degree wedge for 8 inch x 8 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£92.50 ex-VAT
2 degree wedge for 7 inch x7 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£53.33 ex-VAT
6 degree wedge for 7 inch x 7 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£75.00 ex-VAT
2 degree wedge for 8 inch x 8 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£76.67 ex-VAT
6 degree wedge for 8 inch x 8 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£110.00 ex-VAT
4 degree wedge for 10 inch x10 inch radar mount base plate
The most common planing attitude requires 3° - 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
Pre-drilled mounting holes allow fo...
£120.00 ex-VAT
