Raymarine SeaTalk NG - NMEA 2000 Cables

The Raymarine SeaTalk^ng Alarm Buzzer is a network accessory that repeats alarm and alert tones from compatible networked devices ensuring alarms and alerts can be heard on-deck and below decks as needed.  The powerful 100 dBm SeaTalk^ng Auxiliary Alarm Buzzer can repeat...

The SeaTalk ng Starter Kit is the perfect way to get started with your SeaTalk ng compatible Raymarine product. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalk ng product is connected via a Spur Cable. Kit contains 1 x A06064 SeaTalk ng 5-way Connector, 2 x A06031...

Used for connecting an Isolated NMEA 0183 VHF to the SeaTalk ng network.

The SeaTalk1 to SeaTalk ng converter allows select SeaTalk1 devices to interface and communicate on the Raymarine SeaTalk ng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems as well as ST autopilots.

The SeaTalk ng Backbone Kit is an extendeded starter kit containing 2 x A06031 SeaTalk ng Backbone Terminators, 1 x A06037 SeaTalk ng 20m Backbone Cable, 2 x A06036 SeaTalk ng 5m Backbone Cables, 4 x A06028 SeaTalk ng T-Pieces and 1 x A06049 SeaTalk ng Power Cable

The Evolution cabling kit is a basic SeaTalk ng backbone kit contains the following parts : 1 x ng power cable, 1 x 5m ng backbone cable, 1 x 1m ng spur cable, 1 x ng 5 way block, 2 x ng T-pieces and 2 x ng terminators.

400mm long backbone cable when connect to SeaTalk ng T Piece or 5 Way block extends the SeaTalk ng backbone

1 meter long backbone cable when connect to SeaTalk ng T Piece or 5 Way block extends the SeaTalk ng backbone

3 meter long backbone cable when connect to SeaTalk ng T Piece or 5 Way block extends the SeaTalk ng backbone

5 meter long backbone cable when connect to SeaTalk ng T Piece or 5 Way block extends the SeaTalk ng backbone

9 meter long backbone cable when connect to SeaTalk ng T Piece or 5 Way block extends the SeaTalk ng backbone

20 meter long backbone cable when connect to SeaTalk ng T Piece or 5 Way block extends the SeaTalk ng backbone

Backbone extender dongle used to join two SeaTalk ng backbone cables

400mm long spur cable used to connect SeaTalk ng device to a SeaTalk ng backbone

1 meter long spur cable used to connect SeaTalk ng device to a SeaTalk ng backbone

3 meter long spur cable used to connect SeaTalk ng device to a SeaTalk ng backbone

5 meter long spur cable used to connect SeaTalk ng device to a SeaTalk ng backbone

6 meter long spur cable used to connect RS130 GPS to a SeaTalk ng backbone

400mm long spur cable used to connect two earlier SeaTalk ng devices together

SeaTalk ng right angled adaptor used to connect spur cable to SeaTalk ng device when space behind is limited 

1 meter long spur cable to bare end

3 meter long spur cable to bare end

T Piece used for connecting white SeaTalk ng Spur Cables to Blue SeaTalk ng Backbone Cables

5 way block used for connecting white SeaTalk ng Spur Cables to Blue SeaTalk ng Backbone Cables

Terminators go at each end of SeaTalk ng backbone, two are required per system.

In line terminator can be used to at the end of a SeaTalk ng cable to connect to a SeaTalk ng spur cable

5 Way SeaTalk ng connector the centre yellow port used to connect to SeaTalk 1 devices

Place blanking plug in unused SeaTalk ng Spur sockets to protect them

Seatalk NG locking collar

DeviceNet Female to SeaTalk ng  Socket / Male Right Angle Adaptor

DeviceNet Plug / Male to  SeaTalk ng  Female Straight Adaptor

DeviceNet Female to SeaTalk ng Socket / Male Straight Adaptor

400mm NMEA2000 drop cable SeaTalk ng spur to female devicenet

1.5 meter NMEA2000 drop cable SeaTalk ng spur to male devicenet

STng to Devicenet Female Adaptor Cable 1 meter

STNG to Devicenet (Male) Adaptor Cable 1 meter

DeviceNet (Male) Adaptor Cable 140mm

NMEA2000 Devicenet male to Devicenet female drop cable 2meters long

NMEA 2000 Micro Bulkhead Feed Through

Micro C Devicenet Adaptor Cable (Female)

Micro C Devicenet Adaptor Cable (Male)

400mm long adaptor spur cable to connect a SeaTalk 1 device to a SeaTalk ng network. The connection must be made via a bridging device such as an ST70 display or SeaTalk ng to SeaTalk 1 converter

1 meter long adaptor spur cable to connect a SeaTalk 1 device to a SeaTalk ng network. The connection must be made via a bridging device such as an ST70 display or SeaTalk ng to SeaTalk 1 converter

400mm adaptor spur cable to connect a SeaTalk2 device or network to a SeaTalk ng network.

2 meter cable to connect a SeaTalk ng backbone to a 12V switched power supply. Only one power cable is used per network.

2 meter right angled cable to connect a SeaTalk ng backbone to a 12V switched power supply. Only one power cable is used per network.

400mm long adaptor spur cable to connect a NMEA 0183 VHF to a SeaTalk ng network. The connection must be made via a SeaTalk ng to NMEA 0183 converter

STNG Bulk Hd Mounting Cable

STng To SPX Moulded Cable

RS125 PLUS Cable Assembly