Raymarine Audio Source Units Explore
Punch RMX-0 Media Receiver
The RMX-0 is a ground up designed ultra compact digital media receiver ideal for small systems and vehicles. This unit Features Bluetooth streaming audio connectivity for both Apple and Android based devices, RCA Auxiliary inputs as well as Front, Rear and Sub RCA output connections. Control is provided through the water resistant rotary encoder knob and white LED backlit buttons and provide instant sub level control at your fingertips.
The front panel is IPX6 rated for water spray intrusion and features a conformal coated PCB circuit board protecting the vital electronics. We further validate the unit with 500 hours of testing under both the ASTM B117 and D4329 testing standards to make sure it will hold up under years of daily use exposed to the elements.
Key Features
- Bluetooth streaming audio (A2DP) protocol version 1.0 installed
- Simple Secure Pairing (SSP)
- Waterproof Rotary Encoder Volume Control
- White LED Button Illumination
- Front Panel Sub Control
- Voice Command Confirmation
- Rear AUX-In (L/R)
- Rear USB With 1A Charging Only
- Epoxy coated circuit board for water resistance
- Upgradeable Firmware and Bluetooth Software via USB
- Easy 2" Mounting Hole and Compression U-Clamp Mounting
Punch RMX-2 Media Receiver
The RMX-2 features a 2.7"full color TFT display for optimum viewing - even in full sun - that is optically wet bonded to prevent any dust or moisture penetration. It is IPX6 rated and uses a water resistant rotary encoder knob with white LED button illumination and front mounted sub level controls. Additionally, with features such Pandora control capabilities and Bluetooth audio steaming with album art support for Apple and Android products, this unit becomes a true command center of any system.
Output flexibility comes with a 4x50W @ 2ohm internal amplifier or front and rear/sub output RCA's allowing the addition of after-market amplifiers for more power and output. Add-in the EEPROM memory system, custom GUI interface, and wired remote expansion capabilities and you have the only media receiver you'll ever need.
Key Features
- ISO8846/SAE J1171 Ignition Protection Certified
- Pandora Internet Radio
- A2DP and AVRCP Bluetooth Wireless Streaming
- FCC, CE, IC, and C-Tick Certified
- Multi Region Radio Frequencies
- Low Voltage Warning Alert
- AUX and USB Inputs with USB Charging
- On Board Punch EQ Control
- iPod playback with on-screen display
- Independent Subwoofer Level Control
- Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct
- IPX6 Marine Grade
- 7-Band Graphic EQ
- 2.7" full color display w/ auto dimming backlightning
- AM / FM / WB Tuner
- Zone Control: 1 Zone / 1 Source (F/R or Sub)
Punch RMX-5 Media Receiver
The RMX-5CAN features a 2.7"full color TFT display for optimum viewing - even in full sun - that is optically wet bonded to prevent any dust or moisture penetration. It is IPX6 rated and uses a water resistant rotary encoder knob with white LED button illumination and front mounted sub level controls. Additionally, with features such as SiriusXM and Pandora capabilities, Bluetooth audio steaming with album art support for Apple and Android products and true 2 zone/2 source control, this unit becomes a true command center of any system.
Output flexibility comes a 4x50W @ 2ohm internal amplifier or dual zone output RCA's allowing the addition of after-market amplifiers for more power and output. Add in the EEPROM memory system, custom GUI interface and wired remote expansion capabilities and you have the only media receiver you'll ever need. Also features CANbus functionality for connection to Raymarine MFD (Multi-Function Display) systems.
Key Features
- ISO8846/SAE J1171 Ignition Protection Certified
- Stainless Steel Rear Chassis
- Steering Wheel Control Interface Compatible
- Pandora Internet Radio
- SiriusXM-Ready™
- A2DP and AVRCP Bluetooth Wireless Streaming
- FCC, CE, IC, and C-Tick Certified
- Multi Region Radio Frequencies
- Low Voltage Warning Alert
- AUX and USB Inputs with USB Charging
- On Board Punch EQ Control
- Independent Subwoofer Level Control
- Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct
- IPX6 Marine Grade
- 7-Band Graphic EQ
- 2.7" full color display w/ auto dimming backlightning
- Zone Control: 2 Zone / 2 Source (F/R/S + F)
- AM / FM / WB Tuner
- CANbus (Controller Area Network) compatible. Requires PMX-CAN accessory
- Compatible with a Multi-Funtion Display using NMEA2K entertainment standard
Punch RMX-8BB Media Receiver
The RMX-8BB is a hide-away digital media receiver black box designed for use with the RMX-8DH controller.
Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, Dual USB Input w/ Video Playback, BLUETOOTH avrcp 1.5, 2-Source Zone Control, 4-Zone Volume Control, 6 Channel F/R/S 4V Zone 1&2 Preouts, 2 Channel Zone 3&4 4V Preouts, 7-Band Graphic Equalizer, Punch EQ, A/V Input, Video Output, CAN Ready, Remote Control Ready, EEPROM Non-Volatile Memory,Wired Illumination Control, Steering Wheel Control Ready
Key Features
- Automotive grade AM/FM Radio, Weatherband Radio digital tuner. Supports Radio Data System (RDS) to receive and display broadcast information
- Licensed Pandora control (apple direct USB or BT/ android via bluetooth)
- Made for iPhone apple certified
- Bluetooth, A2DP only, AVRCP 1.4
- Simple secure pairing bluetooth profile for android & iOS
- Display album art from connected iPhones on the radios display
- Folder browsing via BT connected iPhones
- 4 sets (Zones) RCA out; 4 active with 4 channels per zone (2 full range + 2 sub) 4V signal output
- Internal power amplifier 4x50w 2 ohm stable
- Selectable high pass and low pass crossover points for each independent zone
- Selectable crossover slopes of 12dB or 24 dB for each independant zone
- Dedicated DSP audio processors for each zone with independent 7 Band EQ+Punch EQ
- Adjustable input gain for each source
- Electrically Erasable Programmable Read-Only Memory (EEPROM) is a type of non-volatile memory used in electronic devices to store data that must be saved when power is removed
- Integrated voltage gauge w/ low voltage alert
- Wired remote ready (up to 3 remotes)
- Rear aux-in (L/R)
- External steering wheel remote control interface compatible
- External trigger input to activate reverse camera mode
- IR remote input
- Wired illumination control
- Optional CAN-BUS transceiver ready (PMX-CAN)
- Rear USB with 1a charging (supports album art on USB connected iPhones)
- Epoxy coated circuit board
- Upgradeable Firmware and Bluetooth Software via USB
- IPX5 Water Intrusion Rating: Water projected from nozzles from any direction shall have no harmful effects.
Punch RMX-8DH Remote Display Head
Designed for use with the RMX-8BB, the RMX-8DH full function wired display head is the ultimate controller for your digital media system. The unit features a ultra bright 5" TFT display designed and chosen for its viewing ability even in full sunlight. The screen is optically wet bonded to the bezel to prevent any dust or moisture penetration ensuring it stays clean and clear.
Access to the Custom GUI interface is provided through the water resistant rotary encoder knob and white LED back-lit buttons allow you to easily adjust the illumination levels of the panel and provide instant sub level control at your fingertips. The display head also features a composite video input for video or camera systems and easy interconnection to the hide away unit with a multi-pin DIN connector.
The panel is IPX6 rated for water spray intrusion and features a conformal coated PCB circuit board protecting the vital electronics. We further validate the unit with 500 hours of testing under both the ASTM B117 and D4329 testing standards to make sure it will hold up under years of daily use exposed to the elements.
Key Features
- 5" Full color Thin Film Transistor display
- Wet Bonded Faceplate: An epoxy layer between display and cover glass eliminates air gap to improve visual clarity and preventing dust build-up.
- Water resistant rotary encoder volume control
- White LED button illumination
- Front Panel Sub Control
- Direct composite video input connection
- Epoxy coated circuit board for water resistance
- Two-piece mounting system to secure panel to mounting surface
- IPX6 Water Intrusion Rating: Water projected in powerful jets from any direction shall have no harmful effects
Punch RMX-1R Wired Remote
Multi Zone Control, Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel Illumination Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination. Works with all PMX source units.
- 2.7" full color display w/ auto dimming backlightning
- Compatible wired remote for RMX-8BB
- Compatible wired remote for RMX-5
- Compatible wired remote for RMX-2
