Scanstrut DS21A-P grey small cable seal fitted on a white cable, with three black rubber bungsScanstrut DS21A-P grey small cable seal fitted on a white cable, with three black rubber bungs
Scanstrut DS21A-P grey small cable seal with black bung inserted, shown with three loose black bungsScanstrut DS21A-P grey small cable seal with black bung inserted, shown with three loose black bungs
Scanstrut DS21A-P cable seal line drawing with exploded screws and cable gland fitted through a deckScanstrut DS21A-P cable seal line drawing with exploded screws and cable gland fitted through a deck
Scanstrut DS21A-P grey small cable seal fitted on a white cable, with three black rubber bungs
Scanstrut DS21A-P grey small cable seal with black bung inserted, shown with three loose black bungs
Scanstrut DS21A-P cable seal line drawing with exploded screws and cable gland fitted through a deck

Scanstrut

Scanstrut DS21A-P Small Cable Seal - Plastic - Grey

£21.74
Tax included. Shipping calculated at checkout.
DS21A-P
The Scanstrut DS21A Small is a vertical entry cable seal for a single cable of 4-9mm, with a 21mm opening that passes connectors of up to 21mm. Moulded in grey high-impact plastic, it routes the lead through a deck or bulkhead and seals the entry to IP68 watertight. You install it without removing the connector, and no sealant is required.
✓ Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Scanstrut DS21A Small seals a single cable of 4-9mm, and its 21mm opening lets a connector of up to 21mm pass through, making it the seal of choice for runs such as power feeds, radar cables and multi-core electronics leads that arrive with a plug too large for a smaller seal.

The grey low-profile dome is ultra-strong and impact-resistant, and the included pre-drilled, blank and split bungs let one seal accommodate cable diameters across its 4-9mm range. Captive nuts make assembly fast and easy to repeat on later installs.

Because the cable is routed without removing its connector and no sealant touches the bungs, a dependable IP68 waterproof entry for a single lead is achieved quickly.

PRODUCT DETAILS

  • Watertight cable seal for routing a single cable through a deck or panel
  • Suits cable diameters from 4 to 9 mm (0.17-0.31 in)
  • 49 mm flange with a 45.7 mm cut-out
  • Graduated bungs to match the exact cable size
  • No messy sealant needed on the bungs
  • Supplied with stainless fixings and gasket
  • Cable seal shell x1
  • Base x1
  • Gasket x1
  • Sealing bungs x4
  • No. 6 x 16 self-tapping screws x3
  • M4 x 10 bolts x3
  • Installation instructions

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

General

Cable typeSingle cable
Cable diameter range4-9 mm (0.17-0.31 in)
OrientationVertical (deck / top entry)
Waterproof ratingWatertight seal

Dimensions

Outer flange diameter49 mm (1.93 in)
Bore / cable opening diameter21 mm (0.83 in)
Height20.5 mm (0.81 in)

Fixing

Cut-out diameter45.7 mm (1.8 in)
Fixings3 x No. 6 x 16 self-tapping screws and 3 x M4 x 10 bolts (supplied)
Pilot hole2.5 mm (3/32 in) soft material, 3 mm (1/8 in) hard material

Materials

Trim materialPlastic
Sealing bungs4 x graduated bungs

No videos available for this product.

Can this cable seal be installed below the waterline?
No, these seals are designed to be installed above the waterline.
What's the best way to drill a blank bung?
Before drilling holes, freeze the blank seal in a freezer, this makes it very easy to accurately and neatly drill the hole. For best fit around cables drill a hole Ø1-2mm larger than the cable diameter. When drilling into a frozen blank seal this hole will look far too big but when the seal defrosts, it will be a good tight fit.