Raymarine
Raymarine YachtSense Low Power Output Module with 4 x 10 Amp Outputs
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Raymarine YachtSense Low Power Module brings precise digital control to the lower-powered electrical loads found throughout a vessel. With four independent 10 A output channels it is well suited to lighting circuits, wiper motors and similar devices, supporting up to four separate loads from a single module.
Each channel is fully dimmable for all types of lights and capable of soft start and soft stop, while built-in load-current measurement, over-current protection, under-current detection, a configurable software fuse and voltage detection keep the system safe and informative. Three layers of redundancy are provided on every circuit. The module is supplied with its fuses fitted (15 A per the installation manual) and forms part of a Master or Remote assembly, drawing its module communications through an internal 6-pin connection.
PRODUCT DETAILS
- Digital output module with 4 x 10 A channels (up to 40 A total)
- Drives lights, wiper motors and other lower-powered devices (up to 4 loads)
- Fully dimmable outputs with soft start and soft stop
- Per-channel load-current measurement, over-current protection and under-current detection
- Software (soft) fuse and voltage detection on every channel
- Three layers of redundancy on all circuits; supplied with fuses fitted
- YachtSense Low Power output module (supplied fitted with Molex connector(s) and fuses)
- Documentation
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
Raymarine Axiom 2 Pro 9 RVM
Raymarine Axiom 2 XL 24 Chartplotter
Raymarine Axiom 2 Pro 16 S
Raymarine Axiom 2 Pro 12 RVM
Raymarine YachtSense Master Unit (12v or 24v) with 2 x J1939, 2 x RS485, Ethernet & STNG inputs
Raymarine Axiom 2 Pro 9 S
Raymarine Axiom 2 Pro 16 RVM
Raymarine Axiom 2 XL 16 Chartplotter
Raymarine Axiom 2 XL 22 Chartplotter
Raymarine Axiom 2 XL 19 Chartplotter
Raymarine YachtSense Remote Unit (12v or 24v) with up to 8 x Signal Inputs or 8 x Signal (50mA) Outputs
Raymarine Axiom 2 Pro 12 S
Power
| Nominal supply voltage | 12 V dc / 24 V dc |
| Operating voltage range | 8 V dc to 32 V dc |
| Maximum output current | 40 A (10 A per channel) |
| Minimum output current | 50 mA |
Connectivity
| Output connections | 4 x 10 A output channels |
| Module communications | Internal 6-pin connection |
Protection
| Channel protection | Load-current measurement, over-current protection, under-current detection, soft fuse, voltage detection |
| Factory-fitted fuse rating | 15 A |
Physical
| Dimensions (H x W x D, excl. busbars) | 172 mm x 28.00 mm x 76.50 mm |
| Weight | 0.27 kg (0.60 lb) |
