Quick

Quick Aleph AL3 P 712 Vertical Windlass (700W, 12V, 10mm)

£1,413.66
Tax included. Shipping calculated at checkout.
FSAL07120010B00
Quick Aleph AL3 P 712: vertical-axis windlass, 700 W 12 V, 10 mm chain.

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Quick Aleph AL3 P 712 is a vertical-axis windlass with a 700 W, 12 V DC motor, supplied with a gypsy for 10 mm chain.

Quick gives an indicative boat length of 7 to 10 m for this power; the indication may vary with boat type and anchor-rode type.

For this motor (700 W, 12 V) the manual's technical data gives: maximum instantaneous pull 850 kg, maximum working load 250 kg, working load 80 kg and current draw 90 A at working load. Speeds and cable/breaker sizing are in the specifications; always size cables and breakers from the installation manual.

PRODUCT DETAILS

  • Version without drum
  • Gypsy for 10 mm chain
  • Base in anodised aluminium in hard oxide
  • With and without drum
  • Rope and chain on a single gypsy
  • Integrated sensor and magnet for chain counter
  • Manual Free-Fall system
  • Emergency manual lift system
  • Supplied with pressure lever
  • Genuine Quick part, part number FSAL07120010B00
  • Contactor units (supplied as standard per Quick's AL3 series page)

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

General

SeriesAleph AL3
Model codeAL3 P 712
Typevertical-axis windlass
Weight17.4 kg (without drum)

Motor

Motor power700 W
Motor supply voltage12 V
Motor typeDC

Anchor rode

Gypsy chain size10 mm

Fitment

Indicative boat length7 to 10 m

Performance

Maximum instantaneous pull850 kg
Maximum working load250 kg
Working load80 kg
Current consumption at working load90 A
Maximum recovery speed27.4 m/min
Recovery speed at working load14.4 m/min
Speeds measured withgypsy for 8 mm chain

Installation

Minimum motor cable cross-section (total length under 20 m)25 mm²
Circuit breaker (DC, delayed type)50 A
Deck thickness25 to 50 mm

No videos available for this product.

Which chain size does this version take?
This part number is listed for 10 mm chain. Quick's installation manual lists the compatible chain standards for each gypsy size; check your chain against it before ordering. Rope-and-chain rodes need the splice made to Quick's specification.
Does it come with a drum?
No. This is the version without a drum; Quick lists a separate 'D' version with drum.
What cable and breaker does it need?
Quick's manual gives a minimum motor cable of 25 mm² for a total cable run under 20 m and a 50 A DC delayed-type circuit breaker for this motor. Longer runs need a larger cable; follow the installation manual.