Quick

Quick BTH386-420 Hydraulic Bow Thruster (420 kgf / Ø386mm / 34kW hydraulic input)

£12,252.84
Tax included. Shipping calculated at checkout.
FGBT386HY420B00
Quick BTH386-420 hydraulic bow thruster, 420 kgf thrust, 386 mm tunnel.

✓ Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Quick BTH386-420 is a hydraulic bow thruster with twin counter-rotating propellers, delivering 420 kgf of thrust in a 386 mm diameter tunnel. It is driven by a hydraulic motor with a recommended flow of 90 l/min at 250 bar, which corresponds to 34 kW of hydraulic power input (Quick BTH manual, adjustment values recommended by Quick).

Quick lists the BTH 386 range for boats of roughly 22-40 m (72-131 ft). The gearbox is aluminium-bronze alloy, the anode is aluminium and the output shaft stainless steel; the propellers are technopolymer or NiBrAl depending on model. The thruster has an independent, replaceable anode and an elastic coupling.

A hydraulic power source (pump, tank and hoses) is not included; the manual covers the Rilsan hose and oil tank arrangement for larger models. Quick recommends the TCD 2022, TCD 2042, TCD 2044 and TCD 2062 controls or PCS TJ1 / TJ2 proportional controls (not included).

PRODUCT DETAILS

  • 420 kgf thrust, hydraulic motor (90 l/min at 250 bar)
  • Twin counter-rotating propellers
  • Fits a 386 mm diameter tunnel
  • Recommended for boats of about 22-40 m (72-131 ft)
  • Hydraulic power input 34 kW
  • Genuine Quick part, part number FGBT386HY420B00
  • Hydraulic thruster, drilling template, installation and use manual, conditions of warranty (standard supply per Quick BTH manual)
Quick BTH386-420 Hydraulic Bow Thruster (420 kgf / Ø386mm / 34kW hydraulic input) exploded diagram
No.Part nameQuick codeBuy link
1 OSP MOTOR PISTONI 41CC BIDIREZFVEMFEL41P386A0
2 OSP KIT GIUNTO BTQ 386 HYDROFVSGG3863235H00Buy
3 OSP KIT PARASTRAPPI (NERO) B00FVSGGPVP109BA00
4 OSP KIT FLANGIA ELICA BTH386 41CC B00FVSGFLBTH386B00Buy
5 OSP KIT RIDUTTORE BTQ386 B00FVSGGBBT3860B00Buy
6 OSP KIT ELICA D386L P480 COMPLETAFVSGEL386L30A00Buy
7 OSP KIT ELICA D386R P480 COMPLETAFVSGEL386R30A00Buy
8 OSP KIT ELICA D386L NYLON COMPLETAFVSGEL386L3PA00Buy
9 OSP KIT ELICA D386R NYLON COMPLETAFVSGEL386R3PA00Buy
10 OSP KIT ANODI ELICA BT 386 ALLFVSGANBTQ38AA00Buy
11 OSP KIT GUARNIZIONI BTQ 386FVSGGRNBT386A00Buy

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Performance

Thrust420 kgf

Hydraulic

Hydraulic power input34 kW
Recommended flow rate90 l/min
Recommended pressure250 bar

Mechanical

Tunnel diameter386 mm
PropellersTwin counter-rotating

General

Thruster weight60 kg

Fitment

Recommended boat length22-40 m (72-131 ft)

No videos available for this product.

What hydraulic supply does it need?
Quick's recommended adjustment values are 90 l/min at 250 bar (34 kW hydraulic power input). The pump and tank are not included.
What tunnel does it need?
A 386 mm diameter tunnel (separate item).
Which controls can I use?
Quick's BTH manual recommends TCD 2022 / 2042 / 2044 / 2062 controls, PCS TJ1 / TJ2 proportional controls and a monitor for the PCS DTW system (not included).
Can I run the thruster continuously?
No. Quick's manual states the thruster is not designed for continuous use. It has built-in protections that limit its running time (see the control panel manual), and Quick states these protections must not be bypassed or modified, as doing so voids the warranty. Do not run the thruster out of the water for more than 10 seconds.
Is installation DIY-friendly?
Quick recommends that the tunnel and thruster are installed by competent, skilled personnel, and the installer bears responsibility for any problems caused by defective installation. The installation and user manual (linked in Downloads) covers the tunnel, gearleg and wiring.