Quick

Quick BTQ2512024 Bow Thruster (120 kgf / 24V / Ø250mm / 6.5kW / MSC)

£4,458.72
Tax included. Shipping calculated at checkout.
FGBT25120240M00
Quick BTQ2512024 24V DC bow thruster with 120 kgf thrust, 6.5 kW motor and 250 mm tunnel diameter.

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Quick BTQ2512024 is a 24V DC electric thruster with twin counter-rotating propellers, delivering 120 kgf of thrust from a 6.5 kW motor in a 250 mm diameter tunnel. Quick lists the BTQ series for boats of roughly 14-21 m (45-69 ft) (recommended boat length for the BTQ 250 range, quickitaly.com).

It has a bronze gearbox, an aluminium anode that is independent from the gearbox and so easily replaceable, and an elastic coupling. Quick's BTQ manual lists a recommended fuse of 275 A (CNL DIN) and a thruster weight of 34.2 kg for the standard version of this model; the weight of this version is not stated.

Quick lists this as the MSC version of the BTQ2512024. Quick's MSC 400/800 is a drive for DC actuators used with its AMC proportional controller (AMC manual); the exact contents and differences of the MSC version are not stated in the documents we hold, so confirm with Quick UK before ordering.

PRODUCT DETAILS

  • 120 kgf thrust, 6.5 kW, 24V DC motor
  • Twin counter-rotating propellers in composite material
  • Fits a 250 mm diameter tunnel
  • Recommended for boats of about 14-21 m (45-69 ft)
  • Bronze gearbox with independent, replaceable aluminium anode
  • MSC version as listed by Quick
  • Recommended fuse 275 A CNL DIN (per Quick manual)
  • Genuine Quick part, part number FGBT25120240M00

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Performance

Thrust120 kgf

Electrical

Motor power6.5 kW
Supply voltage24V DC
Recommended fuse275 A CNL DIN

Mechanical

Tunnel diameter250 mm
PropellersTwin counter-rotating (technopolymer)

Fitment

Recommended boat length14-21 m (45-69 ft)

No videos available for this product.

What voltage and fuse does this thruster need?
The BTQ2512024 runs from 24V DC and Quick's manual recommends a 275 A CNL DIN fuse. Cable cross-section depends on the total positive plus negative cable length; see the battery and cable table in the manual.
What tunnel does it need?
A 250 mm diameter tunnel. The tunnel is a separate item (see Quick bow thruster tunnels in the same range); the thruster supply per the manual is the thruster, drilling template, gasket, O-ring, manual and warranty conditions.
What controls are recommended?
Quick's BTQ manual recommends TCD 2022, TCD 2042, TCD 2044 or TCD 2062 remote controls, the TSC 2000 integrated line switch control or a TMS line switch (not included).
Can I run the thruster continuously?
No. Quick's manual states the thruster is not designed for continuous use. It has built-in protections that limit its running time (see the control panel manual), and Quick states these protections must not be bypassed or modified, as doing so voids the warranty. Do not run the thruster out of the water for more than 10 seconds.
What maintenance does a Quick thruster need?
Quick recommends dismantling and servicing once a year: clean the propeller, tunnel and gearleg, replace the anode (more often if needed), replace the propeller if damaged or worn, check all screws, check for water seepage, check electrical connections and the batteries (DC models). See the installation and user manual for the full procedure.