Quick

Quick BTQ2524024 Bow Thruster (240 kgf / 24V / Ø250mm / 10kW / Version D00)

£6,210.94
Tax included. Shipping calculated at checkout.
FGBT25240240D00
Quick BTQ2524024 24V DC bow thruster with 240 kgf thrust, 10 kW motor and 250 mm tunnel diameter.

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Quick BTQ2524024 is a 24V DC electric thruster with twin counter-rotating propellers, delivering 240 kgf of thrust from a 10 kW motor in a 250 mm diameter tunnel. Quick lists the BTQ series for boats of roughly 14-21 m (45-69 ft) (recommended boat length for the BTQ 250 range, quickitaly.com).

It has a bronze gearbox, an aluminium anode that is independent from the gearbox and so easily replaceable, and an elastic coupling. Quick's BTQ manual lists a recommended fuse of 500 A (CNL DIN) and a thruster weight of 49.1 kg for this model.

Quick's price list carries this as version D00; the difference between listed versions of the same model is not stated in the documents we hold.

PRODUCT DETAILS

  • 240 kgf thrust, 10 kW, 24V DC motor
  • Twin counter-rotating propellers in composite material
  • Fits a 250 mm diameter tunnel
  • Recommended for boats of about 14-21 m (45-69 ft)
  • Bronze gearbox with independent, replaceable aluminium anode
  • Recommended fuse 500 A CNL DIN (per Quick manual)
  • Genuine Quick part, part number FGBT25240240D00
  • Thruster, drilling template, gasket, O-ring, installation and use manual, conditions of warranty (standard supply per Quick BTQ manual)

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Performance

Thrust240 kgf

Electrical

Motor power10 kW
Supply voltage24V DC
Recommended fuse500 A CNL DIN

Mechanical

Tunnel diameter250 mm
PropellersTwin counter-rotating (technopolymer)

Fitment

Recommended boat length14-21 m (45-69 ft)

General

Thruster weight49.1 kg

No videos available for this product.

What voltage and fuse does this thruster need?
The BTQ2524024 runs from 24V DC and Quick's manual recommends a 500 A CNL DIN fuse. Cable cross-section depends on the total positive plus negative cable length; see the battery and cable table in the manual.
What tunnel does it need?
A 250 mm diameter tunnel. The tunnel is a separate item (see Quick bow thruster tunnels in the same range); the thruster supply per the manual is the thruster, drilling template, gasket, O-ring, manual and warranty conditions.
What controls are recommended?
Quick's BTQ manual recommends TCD 2022, TCD 2042, TCD 2044 or TCD 2062 remote controls, the TSC 2000 integrated line switch control or a TMS line switch (not included).
Can I run the thruster continuously?
No. Quick's manual states the thruster is not designed for continuous use. It has built-in protections that limit its running time (see the control panel manual), and Quick states these protections must not be bypassed or modified, as doing so voids the warranty. Do not run the thruster out of the water for more than 10 seconds.
What maintenance does a Quick thruster need?
Quick recommends dismantling and servicing once a year: clean the propeller, tunnel and gearleg, replace the anode (more often if needed), replace the propeller if damaged or worn, check all screws, check for water seepage, check electrical connections and the batteries (DC models). See the installation and user manual for the full procedure.