Quick
Quick Hector HC3 1024DB Horizontal Windlass with Drum (1000W, 24V, 8mm)
£2,321.75
/
Tax included.
Shipping calculated at checkout.
FSHC1024DB08A00
Quick Hector HC3 1024DB: horizontal on-deck windlass, 1000 W 24 V, 8 mm chain, with drum Ø130 mm.
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Quick Hector HC3 1024DB is a horizontal on-deck windlass with a 1000 W, 24 V DC motor, supplied with a gypsy for 8 mm chain and a drum Ø130 mm.
Gypsy and drum configuration as listed in the Quick price list: With right gypsy - right drum Ø 130 mm.
Quick gives an indicative boat length of 10 to 13 m for this power; the indication may vary with boat type and anchor-rode type.
PRODUCT DETAILS
- Gypsy for 8 mm chain
- Base in anodised aluminium in hard oxide
- Jacket in composite material or in aluminium anodised in hard oxide
- With and without drum
- Rope and chain on a single gypsy
- Integrated sensor and magnet for chain counter
- Supplied with pressure lever
- Integrated solenoids unit
- Emergency manual lift system
- Genuine Quick part, part number FSHC1024DB08A00
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
General
| Series | Hector HC3 |
| Model code | HC3 1024DB |
| Type | horizontal on-deck windlass |
| Configuration (price list) | With right gypsy - right drum Ø 130 mm |
Motor
| Motor power | 1000 W |
| Motor supply voltage | 24 V |
| Motor type | DC |
Anchor rode
| Gypsy chain size | 8 mm |
Drum
| Drum diameter | 130 mm |
Fitment
| Indicative boat length | 10 to 13 m |
No videos available for this product.
Which chain size does this version take?
This part number is listed for 8 mm chain. Quick's installation manual lists the compatible chain standards for each gypsy size; check your chain against it before ordering. Rope-and-chain rodes need the splice made to Quick's specification.
What cable and breaker does it need?
Quick's installation manual sets the minimum motor cable cross-section and the DC circuit-breaker rating for each motor power and voltage. Size them from the manual for your cable run; they are not repeated here.
