Garmin ECU replacement for GHP SmartPump
Manufacturer Part No:
010-11053-40 |
Keep your GHP™ 20 SmartPump in working order with this electronic control unit (ECU). The ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.
Garmin GHP Reactor Autopilot Course Computer CCU
Our CCU is the brain of the GHP autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA2000 network to communicate with your GHC 20 and an optional NMEA2000-compatible device. With its advanced solid-state 9-axis AHRS, you are able to mo...
Garmin Autopilot Remote Alarm Buzzer
Wire this buzzer to your course compass unit (CCU) to receive audible alerts from your GHP 10.
£61.63 ex-VAT
Garmin Autopilot Shadow Drive
The GHP 10's patented Shadow Drive technology gives boaters the security of knowing they maintain control even when relying upon the autopilot. Use this Shadow Drive attachment to automatically disengage the autopilot if the helm is turned, allowing the helmsman to manoeuvre the boat.
£293.29 ex-VAT
Garmin Verado Fitting Kit
This hydraulic accessory includes the necessary adapter fittings for connecting a GHP 10 marine autopilot system pump to ORFS style hoses used on Mercury Verado steering systems.
£25.83 ex-VAT
Garmin Check valve kit
Add hydraulic isolation protection to your autopilot pump and steering systems with this check valve kit. This kit improves hydraulic pump efficiency and rudder control while increasing the autopilot pump service life.
Garmin GHP SmartPump
Sorry no longer available
Put an end to guessing which pump size will work with your particular boat. One Garmin GHP SmartPump works for most boats with Hydraulic steering. You know you have the right pump for your boat for optimum control and confidence. Plus, you get complete control in a smaller size with better thermal p...
£1,444.44 ex-VAT
Verado adapter Kit GHP SmartPump
Install our Verado adapter kit to use the GHP 20 autopilot system with Mercury Verado engines. Includes installation instructions.
Garmin ECU replacement for GHP SmartPump
Keep your GHP™ 20 SmartPump in working order with this electronic control unit (ECU). The ECU connects and powers the course computer unit (CCU) and the hydraulic pump, controlling the pump based on information received from the CCU.
Pump replacement for GHP SmartPump
Keep your hydraulically-steered boat out on the open water with this replacement pump. Should you need to replace your pump from the GHP 20 SmartPump for whatever reason, this replacement part will allow you to do so more easily.
£1,243.05 ex-VAT
Garmin GRF 10 Rudder Feedback Sensor
Pair this sensor with the GHP 20 or GHP 12 to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out. The arm of the GRF 10 is...
£174.13 ex-VAT
Garmin Rudder Feedback Extension Cable 5m
Add 5m (16ft) to your cable and let your GRF 10 rudder feedback sensor reach your GHP ECU.
£28.79 ex-VAT
Garmin Rudder Feedback Extension Cable 15m
Add 15m (49ft) to your cable and let your GRF 10 rudder feedback sensor reach your GHP ECU.
£48.79 ex-VAT
Garmin GHP Reactor CCU - ECU Extension Cable 5m
Mount your CCU farther than 3 m (9.8 feet) away from the ECU with a 5 m (16.4 ft), 15m (49.2 ft), or 25m (82.0 ft) extension cable.
£31.29 ex-VAT
Garmin GHP Reactor CCU - ECU Extension Cable 15m
Mount your CCU farther than 3 m (9.8 feet) away from the ECU with a 15m (49.2 ft) extension cable.
£42.96 ex-VAT
Garmin GHP Reactor CCU - ECU Extension Cable 25m
Mount your CCU farther than 3 m (9.8 feet) away from the ECU with a 25m (82.0 ft) extension cable.
£65.11 ex-VAT
Garmin Reactor CCU to ECU or SmartPump Interconnect Cable
Use this 5 meter interconnect cable to connect your GHP Reactor autopilot CCU (course computer unit) to ECU (electronic control unit). Includes bare wire connections for alarm and optional Shadow Drive valve. ECU connector includes threaded collar for compatibility with ECU 12 and SmartPump systems.
£29.63 ex-VAT
Garmin ECU Power Cable with Threaded Collar
Garmin ECU Power Cable with Threaded Collar
£74.80 ex-VAT
Garmin Verado shadow Drive Fittings Kit
This hydraulic accessory includes the necessary adapter fittings for connecting a GHP 10 marine autopilot system pump to ORFS style hoses used on Mercury Verado steering systems.
£26.39 ex-VAT
Garmin Verado adaptor kit
Install our Verado adapter kit to use the GHP 10 autopilot system with Mercury Verado engines. Includes installation instructions.
Garmin GHP Reactor 40 Autopilot Course Computer CCU
The Course Computer Unit is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA 2000® network to communicate with your GHC™ 20 and an optional NMEA 2000-compatible devices. Upgrade...
