Quick

Quick BTQ1806524 Bow Thruster (65 kgf / 24V / Ø185mm / 3.3kW / Version D00)

£2,087.74
Tax included. Shipping calculated at checkout.
FGBT18065240D00
Quick BTQ1806524 24V DC bow thruster with 65 kgf thrust, 3.3 kW motor and 185 mm tunnel diameter.

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Quick BTQ1806524 is a 24V DC electric thruster with twin counter-rotating propellers, delivering 65 kgf of thrust from a 3.3 kW motor in a 185 mm diameter tunnel. Quick lists the BTQ series for boats of roughly 8-15 m (26-49 ft) (recommended boat length for the BTQ 185 range, quickitaly.com).

It has a bronze gearbox, an aluminium anode that is independent from the gearbox and so easily replaceable, and an elastic coupling. Quick's BTQ manual lists a recommended fuse of 175 A (CNL DIN) and a thruster weight of 17.8 kg for this model.

Quick's price list carries this as version D00; the difference between listed versions of the same model is not stated in the documents we hold.

PRODUCT DETAILS

  • 65 kgf thrust, 3.3 kW, 24V DC motor
  • Twin counter-rotating propellers in composite material
  • Fits a 185 mm diameter tunnel
  • Recommended for boats of about 8-15 m (26-49 ft)
  • Bronze gearbox with independent, replaceable aluminium anode
  • Recommended fuse 175 A CNL DIN (per Quick manual)
  • Genuine Quick part, part number FGBT18065240D00
  • Thruster, drilling template, gasket, O-ring, installation and use manual, conditions of warranty (standard supply per Quick BTQ manual)

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Performance

Thrust65 kgf

Electrical

Motor power3.3 kW
Supply voltage24V DC
Recommended fuse175 A CNL DIN

Mechanical

Tunnel diameter185 mm
PropellersTwin counter-rotating (technopolymer)

Fitment

Recommended boat length8-15 m (26-49 ft)

General

Thruster weight17.8 kg

No videos available for this product.

What voltage and fuse does this thruster need?
The BTQ1806524 runs from 24V DC and Quick's manual recommends a 175 A CNL DIN fuse. Cable cross-section depends on the total positive plus negative cable length; see the battery and cable table in the manual.
What tunnel does it need?
A 185 mm diameter tunnel. The tunnel is a separate item (see Quick bow thruster tunnels in the same range); the thruster supply per the manual is the thruster, drilling template, gasket, O-ring, manual and warranty conditions.
What controls are recommended?
Quick's BTQ manual recommends TCD 2022, TCD 2042, TCD 2044 or TCD 2062 remote controls, the TSC 2000 integrated line switch control or a TMS line switch (not included).
Can I run the thruster continuously?
No. Quick's manual states the thruster is not designed for continuous use. It has built-in protections that limit its running time (see the control panel manual), and Quick states these protections must not be bypassed or modified, as doing so voids the warranty. Do not run the thruster out of the water for more than 10 seconds.
What maintenance does a Quick thruster need?
Quick recommends dismantling and servicing once a year: clean the propeller, tunnel and gearleg, replace the anode (more often if needed), replace the propeller if damaged or worn, check all screws, check for water seepage, check electrical connections and the batteries (DC models). See the installation and user manual for the full procedure.