Transducer Adapter 12-Pin Right Angle

Power your compatible black box sonar with this 20 ft (6 m) threaded power cable. The right-angle connector helps with the tight fit often associated with mounting...

Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.

Using your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to the side of your boat.

Connect your 4-pin transducer to your sonar unit with this 10 ft (3 m) extension cable.

This transducer adapter allows you to use your existing 6-pin dual-beam transducer with your 4-pin/dual 4 pin sounders.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

Use our cover to protect your compatible ECHOMAP Plus from the harsh marine environment when not in use.

Surface mount your compatible ECHOMAP Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts and swivels for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.

Keep your compatible marine device at sea by securing and protecting your memory card with this microSD door.

Don't let misplaced or broken trim blemish the beauty of your chartplotter/sounder combo. Use this trim piece snap cover to mount your compatible ECHOMAP Plus.

Power your compatible echoMAP™ chartplotter/sounder combo with this 6 foot (2 meters) power/data cable. Includes NMEA 0183 inputs/outputs.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Garmin User Data Sharing Cable for echoMAP and Striker Displays

Use our cover to protect your compatible ECHOMAP Plus from the harsh marine environment when not in use.

Surface mount your compatible ECHOMAP™ Plus chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease.

Keep your compatible marine device at sea by securing and protecting your memory card with this microSD door.

Looking for a sleeker installation of your compatible marine device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.

Don't let misplaced or broken trim blemish the beauty of your chartplotter/sounder combo. Use this trim piece snap cover to mount your compatible ECHOMAP Plus.

Power your compatible echoMAP™ chartplotter/sounder combo with this 6 foot (2 meters) power/data cable. Includes NMEA 0183 inputs/outputs.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT8HW-IH, GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo or a GPSMAP 10X2xsv/12X2xsv chartplotter.

This adapter cable all...

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Garmin User Data Sharing Cable for echoMAP and Striker Displays

Garmin Protective Sun Cover for echoMAP 95dv and 95sv

Surface mount your echoMAP Chirp 95sv chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. With the mount’s quick cable disconnect feature, you can plug the necessary cords into the mount, allowing you to seat/unseat your device with eas...

Secure and protect the memory card in your compatible marine device with this microSD door.

Garmin Flush Mount Kit for the echoMAP 95dv and 95sv

Garmin Trim Piece Snap Covers for the echoMAP 95dv and 95sv

Power your compatible echoMAP™ chartplotter/sounder combo with this 6 foot (2 meters) power/data cable. Includes NMEA 0183 inputs/outputs.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT8HW-IH, GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP™ CHIRP chartplotter/sonar combo or a GPSMAP 10X2xsv/12X2xsv chartplotter.

This adapter cable all...

Garmin User Data Sharing Cable for echoMAP and Striker Displays

Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to...

Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).

Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.

Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Secure and protect the memory card in your compatible marine device with this SD door.

Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.

Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.

Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.

Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.

Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.

Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to...

Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).

Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.

Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Secure and protect the memory card in your compatible marine device with this SD door.

Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.

Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.

Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.

This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.

Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.

Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to...

Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).

Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.

Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Secure and protect the memory card in your compatible marine device with this SD door.

Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.

Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.

Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.

This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.

Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to...

Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).

Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.

Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Secure and protect the memory card in your compatible marine device with this SD door.

Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.

Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.

Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.

Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.

Garmin's remote input device provides full control of your compatible chartplotter. Rotary knob and joystick controls provide navigation through menus and screens and allows you to...

Use this portable keyed remote to wirelessly control your GPSMAP® 7400, 7600, 8400, 8600 series chartplotter displays. Includes cradle and lanyard. Two AAA batteries are required (not included).

Our protective cover fits your compatible device, keeping it safe from the harsh marine environment when not in use.

Surface mount your GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Secure and protect the memory card in your compatible marine device with this SD door.

Looking for a sleeker installation of your compatible Garmin device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.

Don't let misplaced or broken trim blemish the beauty of your Garmin. Use this trim piece snap cover and mount your compatible GPSMAP device.

Power and connect your compatible GPSMAP® device with this 6-foot, 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.

Connect your GPSMAP 8400 or 8600 series chartplotter to a J1939 network to gain access to features, such as engine or generator monitoring. Like the NMEA2000 network, the J1939 network follows a standard and uses proprietary messages.

This 8-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Extend the cable length of your compatible transducer with this 10 ft (3 m) or 30 ft (9 m) cable.

Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.

Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6 m (23.6 in) long.

This 12-pin right angle adapter connects the transducer to your compatible Garmin device to allow for a professional looking installation in tight spaces.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Extend the cable length of your compatible 12-pin transducer with these 10 feet (3 meters) or 30 feet (9 meters) cables. Supports 12-pin Airmar transducers with XID.

Connect a Port/Starboard pair of thru-hull transducers to the sonar unit with this 12-pin Y-cable. The cable is approximately 10 meters (32.81 ft) long.